Search results
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
-
Bullet seating changing when chambered!? (3006)
Using fiocchi brass and 175 gr smk bullets, I am neck sizing the case twice with a half turn inbetween the 1st and 2nd, then I set my seating depth to 3.290 and on three different cases and three different bullets. After chambering and extracting the seating depth changed to 3.254, 3.258.and... -
5.56 reloading, which primers for AR-15?
I have lake city brass and I am looking to make the most precise 77gr smk bullets that i can. I am reloading for an AR15, 20 inch match barrel, with a YMF match bcg. My question is, what primers should I use? I was going to buy cci primers but they have 3 diff types of primers for the 556 which... -
Reloading percision 3006 and 556 questions
So first I would like to say that any help is appreciated here. My purpose for reloading is to make the best ammunition for my rifles. My 3006 is a 26 in er shaw barrel My 556 is an AR WOA wilde chamber 20 in barrel For my 3006 I got 8 lbs of imr 4350, sierra 175gr hpbt, and cci #200. So my... -
Black hills 77gr remanufactured 78 cents a bullet!
Midway still has them in stock I just got 2 boxes The only difference is these are previously fired brass http://www.midwayusa.com/product/1339114847/black-hills-remanufactured-ammunition-223-remington-77-grain-sierra-matchking-hollow-point-boat-tail-box-of-50 -
Percision rifle group size (picture thread)
Percision rifle, group size (picture thread) Post pics of your targets and rifle used. Give specs on rifle and conditions during session. I am on deployment right now so the only pics I have saved are from my pellet gone at C2 in virginia beach. Shoot from 100 yards on fake atlas bipod and... -
Has any one replaced there savage 110 trigger??
So I am looking for a replacement trigger. I need the old trigger with the roll pin for the bar spring AKA (old savage trigger). When I was young I did to much sanding on it and now the gun is my wifes and she does not like how light the trigger is and there is no returning from what I did 11... -
Long range AR-15 build
I have finally started my AR build! I have almost completed my lower only missing trigger gaurd.:D Anderson arms lower= 43$ Fab defense ssr-25= 195$ Cmmg lower parts kit= 46$ Geissele G2S= 165$ A2 buffer tube kit= 40$ Ergo grip= 42$ I am probably going to get an RRA varmint 24"... -
kidd 10/22 vs. cz455
When looking at competitions results and videos, the kidd 10/22 is on par if not better then the cz455 I think that this is due to finger time on the trigger and not having to remove your shooting hand to cycle the action. So the shooter can focus more time getting on target and trigger control... -
compensator build up = bad accuracy???
On tues I took my wifes 3006 with brand new er shaw barrel to the range and did a break in on it. I put 89 shots through it cleaning a lot until the last 26 shots I did not clean until after. Today I pulled the compensator off and noticed a lot of build up on the muzzle. I tried to cleannit and... -
building my wife a long range set up (savage 110)
building my wife a long range set up (savage 110/30-06) i am building my wife a rifle to call her own. so far i have fixed the trigger job that i kinda made way to light when i first bought the rifle about 8 years ago i have also lapped the lugs and polished all the components to smooth the... -
pretty old 10/22 make over!
so my dad gave me this ruger 10/22 when i was 5 he maybe had it for a few years. so i would say this rifle is about 25 years old and has about 5-7 thousand rounds through it well i decided i wanted to make it into a fun sniper rifle. so i did some work on the trigger and bolt. here are the... -
My shooting set up
what is your set up? Sent from my GT-P3113 using Tapatalk -
-
-
How i am deciding on a full grip CCW
first this grading system was based on my likes and dislikes you could set your own grading system and see what gun is best for you. these guide lines are my likes and what was used to pick the short list of CCW's 1) points for each section is after the (=) sign. 2) most of the grading is... -
decent scope for under 200$
ok i am getting a sps tactical 308 and would like to be able to reach out a good ways with it. i will be getting a bell an carlson 2950 stock also but i will never be able to get my wife to buy off on getting a scope that is 4 times the price of the gun itself. do you guys have any good... -
the pistol with out the manufacture!
what would you buy taking into account the pistol itself and what the pistol has to offer, not the manufacturer. this thread is not about your personal preferance of manufacturer. i know that this will be hard for most of us to do. pretend as if every pistol is made by your favorite... -
+p ammo semi auto vs. revolver
so i am looking into buying a home defense pistol which for me is a 357 mag revolver. One of the revolvers i am looking at is the eaa windicator and the manual states that +p ammunition voids the warranty. Yes i understand why for semi autos they have this rule because it is hard on the moving... -
steyr m9-a1?
There is not a lot of reviews on this gun just wondering if anyone has owned, shot, or worked on one. If you could help me make up my mind that would be awesome:cool: I love the look and the sights and the design of it but is it worth it? -
shooting a pistol straight out of the box!
i am floored at how many people think that they should be able to shoot a pistol straight from the factory, and these people are putting reviews up on the internet giving good manufacturers bad names because they are have problems with there greese gunked pistol at the range :lol2::lol: i...