stu929
M1 Addict
I have the reciever ready to go. If i can get a kit by then id love to attend. Any more of these planned for the fall by any chance?
Steve(stu929), I've got some of the AK63D kits from Century that they were selling late last year if that floats your boat. I need to respond to your email about the lights anyway so can put details in that.
I have 47 and 74 go/no-go gauges but not many other specific tools to add to the spreadsheet that are light enough to get into the truck. I'll grab my punches, drill, and little things but I'll sign up for some drinks and food.
Tim, did I donate some 1/4" steel rods to align the rails when welding last time? (I'm the one that got screwed at a prior party using a drill that wasn't the right size for spacing.) I know I brought them last time but can't remember if I left them. I could cut off another pair to donate if they got lost.
Tim, did I donate some 1/4" steel rods to align the rails when welding last time? I could cut off another pair to donate if they got lost.
Is anybody bringing a .314 reamer for oversize pin? I bought a .302 thinking that was correct got that pin stuck twice, f ed up a reg. pin to get it out. I used it before and barely got that one in. I am pretty stupid at times
looks like you just need to ream it. check to make sure the trunnion hole isn't oversized, also check headspace.
edit:
actually, looking at it again, it looks like its egged on one side... the trunnion hole is closer to the bore on the ejection side.
Your correct the holes are a little egged but all is good, I just put the barrel pin in and set it with a hammer. Checked headspace and it's perfect.
Bratwurst or Italian sausage is what I will be bringing