Too short to SBR (as currently interpreted), at least without without bastardizing it.
Really well put together pistol though.
Not a rifle, but...
Looks like a standard length gas system. That plus a Geneva Convention length stock should give around 29" OAL.
Not a rifle, but...
Must...Resist...Getting...HQL....
That's sweet AB. Where did you get it?
I just meant SBR’ing it with a triangle or poly folder (or traditional underfolder) usually comes up slightly short (~28” or so).
But you’re definitely right, you can find a stock or pin/weld a barrel extension to get you to 29”.
I just meant SBR’ing it with a triangle or poly folder (or traditional underfolder) usually comes up slightly short (~28” or so).
But you’re definitely right, you can find a stock or pin/weld a barrel extension to get you to 29”.
Not a rifle, but...
Geneva Convention stocks are pretty common, and IIRC, there were some triangle folders that are GC length, because they were marketed to the US. I'll see if I can find an example.
ETA: One thing to keep in mind, (Logically) you can't put a flash hider on a Post-October SBR with a folding stock... You're illegally configuring it into a copycat, or something like that -- if you follow the logic of the 29"-rule.
So the state is taking the same stance as the feds regarding barrel length? Muzzle devices have to be pinned and welded to satisfy MD's OAL?
Finally got it home
That gun is way to cool for that stupid brace....I hope Andy wins so you can add a triangle stock and make that little beauty the Bella of the ball again
I know I know ts the best and easiest current option.....not knocking your choice, just upset knowing what it could!!