So much for winter project Loadmaster

[Jmorrismetal]

The case feed, Hornady bullet feed and the latest primer system came in and I made some adapters for my collators so they would work.

I also added a counter, light and mirror, so I could know how many primers I went through and so I could see the powder throw as I couldn't also run a PC die.

In any case here is a video of 100 rounds loaded on a Lee Loadmaster in under 4 minutes.

https://www.youtube.com/watch?v=S9pjmuHAkBU

 

[jjsat]

That's soooo sweet!!!!!

 

[ToBeFree]

Good Job

Rocking it out

 

[Overboost44]

I can't imagine how much ammo you must have on hand. Nice system!

 

[jasonk1229]

pump it realll good

 

[FrankOceanXray]

Now why not automate the lever action, too? Set it and forget it. Come home to one million rounds after a long day at work.

 

[Jmorrismetal]

Three reasons, first is that there is no failsafe, must keep your eye on the powder charge. Second it that the machine is not the best design in the world. I assume that is the fastest 100 rounds any Lee Loadmaster has ever loaded. Third is that you only have 100 primers in the machine at a time and still have to load the primer feeder.

In anycase this is as close to what your talking about that I have made.

https://www.youtube.com/watch?v=MrFhnDQ-eUU

 

[FrankOceanXray]

I know. Relax with the rant. I haven't seen any primer tube that hold a million either.

Calm down. Nice work.

 

[Jmorrismetal]

No rant, just explaining.

 

[Doobie]

Three reasons, first is that there is no failsafe, must keep your eye on the powder charge. Second it that the machine is not the best design in the world. I assume that is the fastest 100 rounds any Lee Loadmaster has ever loaded. Third is that you only have 100 primers in the machine at a time and still have to load the primer feeder.

In anycase this is as close to what your talking about that I have made.

https://www.youtube.com/watch?v=MrFhnDQ-eUU

I want a set up like this!

 

[Jmorrismetal]

I want a set up like this!

You can get pretty close to what I built with one of these.

https://www.dillonprecision.com/content/p/9/pid/23877/catid/1/Super_1050

And one of these

http://www.markvii-loading.com/Mark-7-1050-Autodrive-Mr-Bulletfeeder-Pistol-Caliber-_p_26.html


Only thing you will be missing is the high/low powder check to stop the machine but that would be a deal breaker for me.

If I am not going to put an eye on the charge, I want a PC.