Magnumite
Ultimate Member
Poking the fire a little bit.
Fitted an EGW flat bottom firing pin stop precut for BoMar rear sights. All upper corners and edges were beveled and smoothed to facilitate install with tighter fitting. All vertical corners relieved and smoothed.
Extractor tip tuned, before and after pics.
Adjust extractor tension. With tension applied to the extractor I rap the back of the adjuster to set the tension. This is akin to hitting the vise when laterally tightening the slide rails
Fitted an EGW flat bottom firing pin stop precut for BoMar rear sights. All upper corners and edges were beveled and smoothed to facilitate install with tighter fitting. All vertical corners relieved and smoothed.
Extractor tip tuned, before and after pics.
Adjust extractor tension. With tension applied to the extractor I rap the back of the adjuster to set the tension. This is akin to hitting the vise when laterally tightening the slide rails
Attachments
-
48995394-2DFA-4940-92B0-BF4D44D4CAA4.jpeg95.2 KB · Views: 127
-
80D06146-921B-41EB-87CB-10614016C20D.jpeg77.7 KB · Views: 129
-
EC1919AA-B6F7-42E9-9DDC-29AE9F70AF3A.jpeg14.2 KB · Views: 124
-
D3757D40-050B-412F-A663-A3E9D2F4D4B3.jpeg13.9 KB · Views: 122
-
BBBA145E-4CAA-4A84-9C3A-ECD895FBB7F9.jpeg90.2 KB · Views: 125
-
56678D47-7E6C-4664-B8E7-4C69A3841181.jpeg62 KB · Views: 125