Nice, by any chance, do you know the Maryland OAL requirement?Yup.
And if it will meet MD overall length requirement after doing so, you can put an adjustable stock on it with a carbine buffer tube after approval. If not, stick with a brace. The SBA4 is nice. . .
View attachment 436941
29"-- From the stock fully extended to the end of the barrel (not the flash suppressor)Nice, by any chance, do you know the Maryland OAL requirement?
Y’all are rockstars! Thanks so much29"-- From the stock fully extended to the end of the barrel (not the flash suppressor)
Unless the flash suppressor is pin and welded.29"-- From the stock fully extended to the end of the barrel (not the flash suppressor)
If it will be over 29" with stock fully extended, you can get an SBR stamp and not worry about a silly brace.Nice, by any chance, do you know the Maryland OAL requirement?
That's what I thought.A brace is now considered a stock.
The only semiautomatic SBR <29" that you can have is rimfire.
SBA4 is a brace. It doesn't really matter what you use at this point, they are all going to be considered a "stock". Might as well use a real stock.•••edit - I’m using the term brace but really meaning shoulder stock, gonna go with the SBA4, if approved
Looks like with the stock/brace fully extended I’ll be at 29.75, this does not include the 3” faux suppressor.
I know the free stamp is gone, gonna do an e-file form 1 and send them 200 bucks and hope for a positive outcome.
Any brand you’d recommend?SBA4 is a brace. It doesn't really matter what you use at this point, they are all going to be considered a "stock". Might as well use a real stock.
If you don't mind a little wiggle, magpul carbine stocks are okay. They have a wide assortment. I'm liking this style right now, but I have many others.Any brand you’d recommend?
What is the caliber and barrel length of your pistol barrel?I’m sorry if this has already been addressed. I recently ordered a pistol with a buffer tube instead of a brace. Once I take possession, can I file an e-form 1 and then put a brace on once/if approved?
Thanks
Join fpc, put a brace on it.I'm not sure I understand all of this so what are my brace/stock options with this S&W M&P15-22P 22LR Pistol that was shipped to me without a brace? I got this after the brace ban, waiting for the courts to figure it out? She's all alone in a cardboard box? So Sad!
Thanks, Red
9mm, 8” barrel. I’m gonna swap out the buffer tube for a mil specWhat is the caliber and barrel length of your pistol barrel?
You're going to be too short for an SBR if you live in Md. You will have to make up a 3.5" shortfall to make the 29" minimum overall length. There are solutions for that...9mm, 8” barrel. I’m gonna swap out the buffer tube for a mil spec