223 to 300 blackout

[DaemonAssassin]

What is your sub recipe?

I have loaded up some supers, but need to load up some subs.

But also need to install the 10.5" barrel.

220gr SMK w/ between 8.7-9 gr of Lil' Gun. I don't have my book in front of me, so take the powder name with a grain of salt, but the charge weight is the happy zone for my gun to cycle.

After I get to my book, I'll revise the powder name if needed.

 

[frogman68]

220gr SMK w/ between 8.7-9 gr of Lil' Gun. I don't have my book in front of me, so take the powder name with a grain of salt, but the charge weight is the happy zone for my gun to cycle.

After I get to my book, I'll revise the powder name if needed.

Min for Lil Gun behind a 150 grain round is 13.9 max 15.2

 

[DaemonAssassin]

Min for Lil Gun behind a 150 grain round is 13.9 max 15.2

He was asking for subsonic.

 

[Pinecone]

220gr SMK w/ between 8.7-9 gr of Lil' Gun. I don't have my book in front of me, so take the powder name with a grain of salt, but the charge weight is the happy zone for my gun to cycle.

After I get to my book, I'll revise the powder name if needed.

Thanks. I was going to use AA1680.

I load my supers with H110/WW296 for a 125 grain bullet.

 

[DaemonAssassin]

Thanks. I was going to use AA1680.

I load my supers with H110/WW296 for a 125 grain bullet.

I haven't used AA1680 (couldn't find any) for any of my loads, so I can't give personal data that doesn't exist. I can check the data on mine in my book for the powder I used. It is either Lil' Gun or W296. I can't remember off hand.

 

[Speed3]

I haven't used AA1680 (couldn't find any) for any of my loads, so I can't give personal data that doesn't exist. I can check the data on mine in my book for the powder I used. It is either Lil' Gun or W296. I can't remember off hand.

I might have a lb to spare if interested.

 

[DaemonAssassin]

I might have a lb to spare if interested.

I appreciate the offer. It is something that I'm going to have to think about.

 

[outrider58]

I appreciate the offer. It is something that I'm going to have to think about.

Don't think too long...

I did find this with a quick search:

http://kr-15.com/2013/02/09/subsonic-300-aac-blk-blackout-load-recipe/

 

[Pinecone]

I haven't used AA1680 (couldn't find any) for any of my loads, so I can't give personal data that doesn't exist. I can check the data on mine in my book for the powder I used. It is either Lil' Gun or W296. I can't remember off hand.

I understand, just mentioning what I had.

If you figure out that it was WW296 (same as H110), let me know. I have a bit of that to use.

 

[DaemonAssassin]

I understand, just mentioning what I had.

If you figure out that it was WW296 (same as H110), let me know. I have a bit of that to use.

I shall, my friend. I shall.

 

[crasher]

It's an ongoing project, the 3rd generation is in the works.

Any positive word on these, or advice/direction for putting one together if you're not inclined to put a kit out there on the market for us lil guys?

Thanks for any help/feedback.

 

[montoya32]

I made this contraption to cut it down before a final trim on a GSI tool head.

https://www.youtube.com/watch?v=iNXz97yWp2w

Get the hell out of here, Doc Brown! That is cool.