BUFF7MM
☠Buff➐㎣☠
I was doing some initial case prep on some 223 range pickups and as I was resizing I had what I thought was a 223 case that felt real light as it traveled toward the top of the stroke during sizing. This case is the same side as a 223 case measuring .35 OD at the shoulder and .37 at the head, tha measurement from the rim to the start of the shoulder on the odd case is 1.27 where the 223 is 1.44 I can't really get an OAL measurement as the odd case neck was resized and I'm sure it grew a little. The shoulder angle looks to be the same as the 223 also and the odd case headstamp is PPU 223.
You can see in the photo where the top part of the neck was sized down to 22 but there's no way the shoulder was reformed on anyway since the case length to the shoulder is shorter. I have no idea what this is and it's going in the scrap bin or to one of the Blackout reloaders in our group.
First picture showing the sizing of the neck only
Second picture from the left for comparison
300 Blackout, ? Case, 223, 6.8SPC, 25-45 Sharps.
You can see in the photo where the top part of the neck was sized down to 22 but there's no way the shoulder was reformed on anyway since the case length to the shoulder is shorter. I have no idea what this is and it's going in the scrap bin or to one of the Blackout reloaders in our group.
First picture showing the sizing of the neck only
Second picture from the left for comparison
300 Blackout, ? Case, 223, 6.8SPC, 25-45 Sharps.