The Official AR-15 Picture Thread

[Red Stitch Tactical]

One of many. I have a new one I just started putting together this week.

 

[clandestine]

I might take you up on that won't be for at least a month or 2 I'm trying to get all the parts together. Really appreciate the offer

Sent from my DROID RAZR using Tapatalk 2

No problem at all my friend. When your ready just send me a message on here and on FB.

 

[LineofSight]

Loving that rail crabs. Nice collection for future builds.

 

[jrumann59]

Crabs I do not know where you are but if you are in the Harford county area I can can give you a hand also. I know Chad won't approve but I bought the Rainier Barrel dimpler for Vltor set screw gas blocks. I do have all the tools needed to put an AR together including vise blocks.

 

[wjt1169]

Start of a couple builds

One will be a noveske lower/vltor mur 1a upper with geissele rail and dd barrel

Second will be seekins upper/lower combo with most likely a 15" mi ss gen 2 rail and 18.5 spr noveske barrel

I'll post updated pictures when they are all build and ready.

A whole lot of awesomeness right there!

 

[wjt1169]

Absolutely.

Where is the S/N on these?

On the other side of the magwell...

 

[Semper Noctem]

On the other side of the magwell...

Thanks man. Dang, even the serial roll mark looks bad ass.

 

[04RWon]

 

[HarCo2ANewb]

First build, Phase 5 Pistol Buffer is on its way and I am going to order a YHM 7" diamond rail and AAC Blackout 51t to cap it all off. Hope to eventually SBR and suppress it inside a 12" Seekins BAR.

Definitely channeling my inner Han Solo as is...

Pictured is:
Seekins lower
Spikes Enhanced LPK

Seekins Upper
WMD NiB BCG
Noveske 8.2 300BLK
Vortex SPARC
Magpul AFG2
Magpul MBUS

Just have to do all the pesky hard parts of the build now

 

[annihilation-time]

I believe your rear sight is on backwards.

 

[HarCo2ANewb]

I believe your rear sight is on backwards.

Half the gun probably is at this point

It's all taken back apart now since I have a bit to wait but thanks for the reminder when it all goes back on

 

[rouchna]

I believe your rear sight is on backwards.

Beat me to it. Other than that, looks great.

 

[AliasNeo07]

First build, Phase 5 Pistol Buffer is on its way and I am going to order a YHM 7" diamond rail and AAC Blackout 51t to cap it all off. Hope to eventually SBR and suppress it inside a 12" Seekins BAR.

Definitely channeling my inner Han Solo as is...

Pictured is:
Seekins lower
Spikes Enhanced LPK

Seekins Upper
WMD NiB BCG
Noveske 8.2 300BLK
Vortex SPARC
Magpul AFG2
Magpul MBUS

Just have to do all the pesky hard parts of the build now

Dude that looks just like his DL44. +15 internets to you

 

[wjt1169]

First build, Phase 5 Pistol Buffer is on its way and I am going to order a YHM 7" diamond rail and AAC Blackout 51t to cap it all off. Hope to eventually SBR and suppress it inside a 12" Seekins BAR.

Definitely channeling my inner Han Solo as is...

Pictured is:
Seekins lower
Spikes Enhanced LPK

Seekins Upper
WMD NiB BCG
Noveske 8.2 300BLK
Vortex SPARC
Magpul AFG2
Magpul MBUS

Just have to do all the pesky hard parts of the build now

Why not go with the Seekins BAR...it's lighter, and will keep the cool look going!!

 

[wjt1169]

Seekins BAR on this one...

 

[HarCo2ANewb]

Why not go with the Seekins BAR...it's lighter, and will keep the cool look going!!

True story, the rail is the only thing that has given me any difficulty in selection. I still might grab the 9" BAR.... Everything else just clicked, grr!

 

[hdatontodo]

From JoeBobOutfitters.com

LAR Grizzly 22LR Terminator Side Charge Upper (about the cost of an S&W M&P 15-22)

New Frontier Armory LW-15 GENII Complete AR15 Polymer Lower

The $30 Cabelas blackpowder scope 3-9X40 is likely there temporarily.

I had to file down the top of the lower in one place since the upper has a bolt that leans against the top of the buffer tube housing.

 

[TyFromMD]

True story, the rail is the only thing that has given me any difficulty in selection. I still might grab the 9" BAR.... Everything else just clicked, grr!

I have a 9" Spikes BAR that I have been considering changing out for a 7" Spikes/seekins BAR, only because my barrel is 7.5" AND I don't feel like disassembling the upper to change out the rail. If you find a 7" BAR but prefer a 9", and you're interested MAYBE we can work a trade?

 

[niftyvt]

Now I just need a lightweight rail and an aimpoint. I installed a BAD lever after I took the pic.

I think I am going to take my aimpoint T-1 off my other rifle and put it on the BCM and my old rifle will get a aimpoint PRO as a replacement.

Trigger is a Geissele SSA, charging handle is a BCM Gunfighter MOD 4. I have shot the upper quite a bit but just got the lower in last week!

 

[HokieCasey]

From what i have been able to tell, the Centurion rails are one of the lighter quad rails on the market at present. I think they only way to get lighter is one of the modular rail systems.