platekiller
Ultimate Member
Took a couple days but I got 500 rounds of 9mm cranked out. Put a hornady bullet feeder on the Dillon 550 and it makes things go quick. Especially since my son likes to fill the empty bullet tubes.
You'll love it. This is exactly what I did to fix the clutter from my Lee turret press. Works really well! I like how it has a little place to store shell holders, too. I need to get the hangers for 650 toolheads...Ordered another inline fab 48” rail for my gun room. I have one with some holders,m and really like it. Well I managed to score the extra lee class turrets I needed so I can have all my die sets, setup in one. Don’t have a place to put all the turrets though. So a 48” rail, three tool head racks and a tray are on the way to solve that little issue.
I discovered that with 100gr bullets, the old Swede M96 6.5x55 can be loaded to the same velocities as a 6.5CM.
I'm going to chrono some rounds at AGC tomorrow and it is possible ToolAA and Fidelity will get to meet Bubba in a few weeks.
Not reloading...but a Swede is on the list, thinking of having one built if I can find an action..
Been reading alot about reloading for it, to use it at its fullest potential. Another round to
load for ....����
-Rock
While I was waiting for my wet tumbling to complete and then dry loaded up 150 tubes to the kernel.
I discovered that with 100gr bullets, the old Swede M96 6.5x55 can be loaded to the same velocities as a 6.5CM.
I'm going to chrono some rounds at AGC tomorrow and it is possible ToolAA and Fidelity will get to meet Bubba in a few weeks.
I made a ball bearing roller handle for my Lee APP Press.
Lee makes a pretty nice roller handle setup for it that keeps the pressure down over the top of the cam with the die. It's only $20-$25 depending on the source - I'm just too cheap for that.Nice work! Not having an APP (yet), I did think the handle was one of the places they kept the cost down.