sig guy
Member
Looks nice sig guy... 16" barrel? Also is that a CMC trigger I spy as well?
Yes sir!,16 inch with a CMC single stage.
Looks nice sig guy... 16" barrel? Also is that a CMC trigger I spy as well?
Colt pistol build with all Colt parts (except grip and brace). This was a fun project, especially finding the 11.5 HRT Colt barrel and the Virgin M4 lower. Have not shot this beaut, but should be fun.
Very nice! I want to build one.
AR-9
CMMG radial delayed bolt/barrel combo, 5"
Tri-lug adapter w/ SilencerCo Octane 45K
(Not pictured; ILWT 3-lug flash cone and Angstadt arms 3-lug Blastwave device for when I don't want to shoot suppressed)
Midwest Industries MI-CRM4.5 4.5" rail
PRI M84 gas buster CH
Mil-spec upper receiver
Hanover Armory custom lower (LGS makes their own)
Running Gen 2 Pmags with CMMG Guard inserts (ARC 9mm)
CMMG LPK
Radian Talon ambi safety
POF 3.5# trigger
Magpul BAD lever
Holosun HS503G-ACSS
BCM Mod 3 grip
Blitzkrieg hydraulic buffer w/ Strike Industries 308 flatwire spring
BCM A5 buffer tube
SBA3 brace w/ lunar concepts black multicam splitfix strap
Olight PL Valkyrie Pro
Colt pistol build with all Colt parts (except grip and brace). This was a fun project, especially finding the 11.5 HRT Colt barrel and the Virgin M4 lower. Have not shot this beaut, but should be fun.
AR-9
CMMG radial delayed bolt/barrel combo, 5"
Tri-lug adapter w/ SilencerCo Octane 45K
(Not pictured; ILWT 3-lug flash cone and Angstadt arms 3-lug Blastwave device for when I don't want to shoot suppressed)
Midwest Industries MI-CRM4.5 4.5" rail
PRI M84 gas buster CH
Mil-spec upper receiver
Hanover Armory custom lower (LGS makes their own)
Running Gen 2 Pmags with CMMG Guard inserts (ARC 9mm)
CMMG LPK
Radian Talon ambi safety
POF 3.5# trigger
Magpul BAD lever
Holosun HS503G-ACSS
BCM Mod 3 grip
Blitzkrieg hydraulic buffer w/ Strike Industries 308 flatwire spring
BCM A5 buffer tube
SBA3 brace w/ lunar concepts black multicam splitfix strap
Olight PL Valkyrie Pro
Hi all,
Here are two of my more interesting builds. Top started life as a Ruger AR556 but there’s isn’t much left of as you might be able to tell. Mostly Geissele parts now!
Bottom is a USMC SAM-R inspired build, but it’s chambered in 6.5 Grendel. I say inspired because I definitely made some substitutions on a few parts (gas block, barrel finish, trigger, etc.). Kinda cheaped out on the optic, but will probably pick up the proper Leupold for it at some point. Has the proper PRI charging handle, scope rings, stock, KAC handguard, M16A4 marked lower, Harris bipod with KAC stud and pod-loc, etc. Let me know if you have any questions! (I can add build lists if you all would like.)
Thanks,
Jake
How'd you deal with the HBAR requirement for your AR556/Geissele?
AR-9
CMMG radial delayed bolt/barrel combo, 5"
Tri-lug adapter w/ SilencerCo Octane 45K
(Not pictured; ILWT 3-lug flash cone and Angstadt arms 3-lug Blastwave device for when I don't want to shoot suppressed)
Midwest Industries MI-CRM4.5 4.5" rail
PRI M84 gas buster CH
Mil-spec upper receiver
Hanover Armory custom lower (LGS makes their own)
Running Gen 2 Pmags with CMMG Guard inserts (ARC 9mm)
CMMG LPK
Radian Talon ambi safety
POF 3.5# trigger
Magpul BAD lever
Holosun HS503G-ACSS
BCM Mod 3 grip
Blitzkrieg hydraulic buffer w/ Strike Industries 308 flatwire spring
BCM A5 buffer tube
SBA3 brace w/ lunar concepts black multicam splitfix strap
Olight PL Valkyrie Pro
Wrapped this up a few weeks ago...
-Dirty Bird burnt bronze handguard 13inch
-Aero standard lower (burnt bronze)
-Aero standard upper (burnt bronze)
-Aero Charging handle
-Aero gas block
-Aero carbine stainless gas tube
-Magpul MOE Stock
-Barrel: Hardened Arms HBAR stamped 16" 5.56 4150 CMV
-SOLGW lower parts kit and Liberty Fighting trigger
-SOLGW buffer tube, backplate and castle nut
-SOLGW ejection port door and forward assist
-Tubb buffer spring (stainless steel)
-Colt H buffer
-Phosphate Aero BCG with SOTAR reliability service
While the handguard looks really nice, I've got some reservations about the aluminum barrel nut. If I can find a steel barrel nut that works I'll swap it out. The cerakote on the upper and lower look great. It does create a fit that is a little tight for parts and will have to lap the trigger pin hole. On a positive note, the upper and lower have a tight fit with no gaps.