bigmancrisler
2A Preacher
Thank you Bigmancrisler for the Varget trade. Great meeting you today. Thank you.
Thanks you as well.
Sent from my iPhone using Tapatalk
Thank you Bigmancrisler for the Varget trade. Great meeting you today. Thank you.
I may have a 7x57 form and trim die I would give you if you want to make 7mm out of 30-06. They will work fine in Dieudonne Saive's baby.Does anyone have any 7mm mauser and 7.5 French brass? I just came into both a Mas36/51 and a FN49 in 7mm.
Lmk what your looking for.
Sent from my iPhone using Tapatalk
I may have a 7x57 form and trim die I would give you if you want to make 7mm out of 30-06. They will work fine in Dieudonne Saive's baby.
Also, I used .308 cases and .308 bullets for years in my take home Model 36 with good accuracy and no problems using IMR 4895 powder.
After the first time a .308 case is fired, it will fill the chamber and bulge a little at the base. From then on, you only neck size the brass by backing out your .308 size die and use a Lee FCD crimp die to crimp the shorter case neck. If you have too, grind down the bottom of the collet sleeve to bring down the crimp.
Enjoy, they are both great shooting guns.
Not a trade but in stockI have 2lbs Varget, 2 1K bricks of Rem 9-1/2 LRPs
I'm looking for Lapua headstamp 338LapuaMag brass, Fed 210 primers, and Fed 215 primers.
I have:
Brass decapped and wet tumbled: 308, 223, 45-70, 45LC, 44 mag, 38spl, 357mag
Pistol brass fully processed: 9x19
Rifle brass fully processed (wet tumbled, annealed, FL size, trim): 308, 223, 6.5 creedmoor
Projectiles: sierra .308 150 soft points, 165 soft points
I want:
284 brass
6br brass
.224 pills- speer 75 or 62 gold dot
.243 pills- Berger 88 varmint, 105 hybrid, Nosler 107cc, sierra 85 hpbt gameking
.264 pills- Berger 140 hybrid, 130 hybrid, Nosler 140 rdf, speer 140 gold dot
RL19, benchmark powders
Cci 200, 400, 450 primers (current production only)
Not much. 46pcs. One of my friends oopsed thinking it was 41 mag brass. He doesn't reload, so I can't say his mistake makes me worry.How much 45LC?
Not much. 46pcs. One of my friends oopsed thinking it was 41 mag brass. He doesn't reload, so I can't say his mistake makes me worry.
I have ~250 lbs of pure lead from cut keel blocks, and other misc sources. Want to trade 1:1 for WW or range scrap hardness (10-12 bhn) hardness lead. Can consider other lead (linotype, foundry, etc.). Based in Columbia, shoot at AGC, can FTF anywhere in a reasonable vicinity for both.