Guys, I started a project to form some 50/90 brass into 43 Beaumont. I'm good to go except finding a case trimmer that is wide enough. I have the Lee trimmer. Does anyone know if Lyman, RCBS, or other trimmers are a hair larger?
For info I bought the 4D die set (pretty expensive but have the price of the RCBS set). I cut the brass down with a dremmel than lubed the crud out it and sized it. no problems. The hard part was trimming it down to correct length afterwards because my trimmer is to small.
Let me know if you have thoughts.
Eric
For info I bought the 4D die set (pretty expensive but have the price of the RCBS set). I cut the brass down with a dremmel than lubed the crud out it and sized it. no problems. The hard part was trimming it down to correct length afterwards because my trimmer is to small.
Let me know if you have thoughts.
Eric