psl-54c or polish milled 1960 ?

[slayr15]

I want both but can only get one of them . I can't make up my mind . I have a bunch of ak's but no milled and my yugo sniper could use a little brother. Help with some pro's and cons of each.

 

[Numidian]

I'd go with a milled AK personally.

 

[rob-cubed]

+1 on the milled. They are getting harder and harder to find.

Both are CAI builds so both are gambles, but it's more likely the milled will sell out long before the PSLs do. That gives you the chance to have both, at least.

 

[zoostation]

I'd get the milled AK. The PSL is not a Dragunov, it's basically an AK in 7.62x54 with a long barrel.

 

[Bigdtc]

Milled..

 

[midcountyg]

+1 on the milled. They are getting harder and harder to find.

Both are CAI builds so both are gambles, but it's more likely the milled will sell out long before the PSLs do. That gives you the chance to have both, at least.

exactly my thoughts

 

[Jimbob2.0]

Id go milled now, go PSL later when you are ready

 

[fivepointstar]

how about the VZ-58?? its a work of art for a combloc

 

[Markp]

Neither, M76 in 8mm, but sounds like you might have one... in which case, milled AK.

 

[Scott7891]

All I can say is what are you looking for in this purchase? It all depends on what you intend to do with it. If you want a long range shooter then go with the PSL. If you are looking for a plinker/general assault type then go with the milled AK. It is up to you but in the end you must look to what you really want to do with it. If you say you have a bunch of AK plinker types then go with the PSL and diversify your collection.

If worse comes to worse you can always get a kit and buy a Firing Line milled receiver and go from there:
http://www.firinglineoklahoma.com/home.html

 

[slayr15]

Ordered the polish 1960 from alantic today ! Bob at shooters supply in whaleyville is taking care of the transfer