What is the humidity like in the room you are shaking in?
I’m using that left one and I got Chinese red or something I haven’t opened yet
I think in need assistance, or tutoring, I’ll buy beer, pizza, cook deer steaks or roasts. The wife might be flying out so I got lots of free time
Did you ever calibrate the overn?
Ok, so I had the weather station running today and had humidity at 36% inside and 38% outside. Put the outside sensor in the garage and came back to check it and it said 60%. I didn't want to do his in the house. I guess I need to drop cloth in the basement and on the work bench and have a old cookie sheet to carry the coated bullets on the wire screen pan to the oven in the garage for backing as a trial now.
The garage is built into the hill so my back wall is 4' stud and 4' block. Helps is stay warmer, but I am assuming also moister. <sigh>
I've done the Hulu hoop spin and no matter how long I continue they don;t cover all the way. I'll have to measure the basement humidity and adjust. I know when I get the wood stove fired this weekend it will get dry down there for sure.
It is at least promising to know possibly what the issue is and I'm not as stupid as my bullets look.
How low does the humidity have to get? I put the weather station downstairs and got 49% at my bench but the wood stove has been off. I just started it back up and I’ll see if it lowers it before trying again.
Guzma, I have the harbor freight double for tumbling brass and made a one piece tube from 4” pvc. I could just buy two more plugs and caps and make one for blue and one red. I already have 4’ of pipe left. I got to go to Lowe’s anyway to get a 2x4 to set my garden seedings in the window and hang the grow light
https://www.youtube.com/watch?v=8uF-06Haq04
Worked for this guy. He goes over the type of PVC to get; don't get the interior foam core stuff and it should be electrically conductive. Good luck!