OrbitalEllipses
Ultimate Member
Holy hell.
The bullet came right out without any effort. I used a dow rod and barely pushed it and it fell right out.
Scrap it and spend ur money on an H-bar or AR pistol in 556. Never understood the 9mm AR nonsense
Thats good. One less thing to resolve.
To get the casing out you plug the front of the chamber with a cleaning patch and pour cerrosafe in the chamber from the breach. Let it cool and tap the casing out.
Here is the idea:
http://www.mdshooters.com/showthread.php?t=191058
How far down the front of the chamber should I go? Its a 5.5" barrel I don't fill the whole barrel do I? That's probably gonna come out as a stupid question.
Well thankfully I don't have to go that route. I took the whole thing apart and using a large copper bore brush I got it out. I went into the back of the casing and twisted the brush till it was tight then pulled hard. It came out. So now all peices of the shell are out. My plan is to put it back together and have someone look at it or should I just leave it apart?Not stupid at all. I would put the patch at the front of the chamber so only the chamber gets filled (Dont want the cerrosafe to form into the rifling).
Well thankfully I don't have to go that route. I took the whole thing apart and using a large copper bore brush I got it out. I went into the back of the casing and twisted the brush till it was tight then pulled hard. It came out. So now all peices of the shell are out. My plan is to put it back together and have someone look at it or should I just leave it apart?
Sent from my SCH-S968C using Tapatalk
Scrap it and spend ur money on an H-bar or AR pistol in 556. Never understood the 9mm AR nonsense
I honestly don't know the buffer and spring. I got it from 9mmar.com. I was gonna order a wolf spring when I get paid and try a heavier buffer. I tried to weigh my buffer but my scale only goes up to 100 grams. Which only comes out to roughly 3.5 ounces. It kept erroring out my scale so I guess it weighs more than that.
Its the one one the right. I sat it next to my spikes t2 out of my rifle for a comparison.Can you show me a picture of the buffer?
I would consider a Tubb AR15 Flat Wire Spring if you can afford it. I cant tell you how many malfunctioning AR's in 9mm that spring has fixed, even XP springs dont perform as well.