FlatsFlite
Active Member
7.62x39 brass
Run it through a sizer die
10gr of Clays
A pinch of grits
A dab of wax
Load and fire into old pillow *
Eject casing
Run it back through the sizer die
**
Prime
Drop powder
Check powder
Fill case
Seat/crimp 129gr. SST
Box and sit on shelf to chill
*block off gas system or it will eat your grits
** neck reaming may be necessary depending on brass
Pic l to r: 7.62x39, first pass through die (notice the taper), fireformed (notice the sharper shoulder), and finally resized/loaded
Run it through a sizer die
10gr of Clays
A pinch of grits
A dab of wax
Load and fire into old pillow *
Eject casing
Run it back through the sizer die
**
Prime
Drop powder
Check powder
Fill case
Seat/crimp 129gr. SST
Box and sit on shelf to chill
*block off gas system or it will eat your grits
** neck reaming may be necessary depending on brass
Pic l to r: 7.62x39, first pass through die (notice the taper), fireformed (notice the sharper shoulder), and finally resized/loaded
