Engraving services

[FI$H]

We are located in Damascus, MD.

As most of you know I make custom engraved dust covers, but we just got a new engraver that will allow us to engrave on just about anything, metal, plastic, or glass.

For the shooters out there this means we can engrave just about anything you want on any gun part you can think of.

The services that we are going to offer to start are

AR10/15 Uppers- Price starts at 35.00

AR10/15 Lowers- Price starts at 35.00 (since we dont have an FFL you would need to bring the lower to me and stay for the engraving.)

Magazines- Price starts at 15.00

Handgun Slides and handgun barrels- Starting at 50.00

Handgun frames- Starting at 25.00 (since we dont have an FFL you would need to bring the lower to me and stay for the engraving.)

All other parts will be priced out on a case by case basis.

You can email us at info@engravethisnow.com (Formerly SimplyZombie)

 

[Topher]

This is good news.
I have several lowers that will need NFA work.

 

[FI$H]

Let me know when you want it done!

Sent from my SGH-T989 using Tapatalk 2

 

[FTJoe]

can the end of the barrel (business end) be engraved? .45 cal barrel so a thicker walled barrel, but not sure how thick exactly (glock 21).

 

[JBinDC]

can the end of the barrel (business end) be engraved? .45 cal barrel so a thicker walled barrel, but not sure how thick exactly (glock 21).

I was thinking the same question for a 1911 Bull Barrel.


On another note, how much for this:

Seriously though, I'm in MoCo and most def will be bringin ya my AR once I figure out a design. Please share samples of available fonts. --JB

 

[Mdeng]

I have an AR lower that I would like to have my company logo engraved on (See my avatar). What type of data file do you need my graphics in? I would also like to remove the safe/semi safety logos and use the above on it.

 

[FI$H]

I was thinking the same question for a 1911 Bull Barrel.


On another note, how much for this:

Seriously though, I'm in MoCo and most def will be bringin ya my AR once I figure out a design. Please share samples of available fonts. --JB

The engraving for a lower starts at 35.00 and as for the fonts we can use just about any font you would like us to use.

I have an AR lower that I would like to have my company logo engraved on (See my avatar). What type of data file do you need my graphics in? I would also like to remove the safe/semi safety logos and use the above on it.

If you want I can bring the engraver down to SOMD and we can invite some more people and make it a day?

 

[FI$H]

can the end of the barrel (business end) be engraved? .45 cal barrel so a thicker walled barrel, but not sure how thick exactly (glock 21).

Can you send me an image of where on the barrel you would like us to engrave?
Send it to info@engravethisnow.com

 

[FTJoe]

email sent.

 

[Mdeng]

If you want I can bring the engraver down to SOMD and we can invite some more people and make it a day?

Let me know when you are available and we can set something up. Is your engraving done freehand or is it computer controled?

 

[StaFrosty]

T.C. Martin Jewelry does engraving. They are located on RT 5 southbound at Golden Beach road, 40 bucks for an AR lower.

 

[FI$H]

Let me know when you are available and we can set something up. Is your engraving done freehand or is it computer controled?

It is all computer done with a CNC diamond drag engraving machine.

T.C. Martin Jewelry does engraving. They are located on RT 5 southbound at Golden Beach road, 40 bucks for an AR lower.

Thats nice, I do it for 35 and basically come to you.

 

[Mdeng]

It is all computer done with a CNC diamond drag engraving machine.

Do you need my graphic in any particular format?

 

[FI$H]

Do you need my graphic in any particular format?

We can take most any file most people use JPEG or PNG

 

[MEGARMS]

T.C. Martin Jewelry does engraving. They are located on RT 5 southbound at Golden Beach road, 40 bucks for an AR lower.

Why would you hijack his thread like that?

 

[tgeb]

Does the diamond drag type machine engrave the required 0.003"? I thought you would need a rotary type machine to get that depth, but I know very little about it.

I do have 2 - 80% lowers that I want to put some letters and numbers on.

 

[FI$H]

My machine does both drag and rotary, so we can cover it all.

Sent from my SGH-T989 using Tapatalk 2

 

[tgeb]

Thanks, Dad.

 

[Cyclone]

I was thinking the same question for a 1911 Bull Barrel.


On another note, how much for this:

Seriously though, I'm in MoCo and most def will be bringin ya my AR once I figure out a design. Please share samples of available fonts. --JB

this is effing hilarious...

 

[FI$H]

We are thinking about getting a table at the Howard co. fairgrounds for the upcoming gun show, would any of you be interested in meeting there? This way you can shop while we engrave.