IMBLITZVT
Ultimate Member
They'll ship the kit/mags out of state.
Or I succeeded from the State of MD! Sounds like a good idea to me!
They'll ship the kit/mags out of state.
I think the link was for a post count restricted area.
Try this one.
http://www.weaponsguild.com/forum/index.php?topic=52787.msg730312#msg730312
If you already have kits, it may not be worth it. If you don't have a lathe, getting the barrel profiled is the biggest task, when they come back in stock.
Hey sled, saw you also grabbed a flat over at the Guild.
For the guys that have joined over at weapons guild and gotten flats, but don't have enough posts to see the loaner program, I am on the list for the bending jig. I don't have an eta for the jig yet, but I'm number five so it shouldn't be too long before its headed my way.
If you guys are interested, we could do a short notice get together when the jig comes in. Let me know if you are interested.
Also, having looked at the flat versus the receiver stub, I've decided that the best thing to do is graft the flat onto what's left of the receiver. That means I'm going to have to make a mandrel to get everything lined up properly. I don't have a rotary table for the mill at work, so it will be a homebrew kind of deal, but that's the direction I'm headed.
Hey sled, saw you also grabbed a flat over at the Guild.
For the guys that have joined over at weapons guild and gotten flats, but don't have enough posts to see the loaner program, I am on the list for the bending jig. I don't have an eta for the jig yet, but I'm number five so it shouldn't be too long before its headed my way.
If you guys are interested, we could do a short notice get together when the jig comes in. Let me know if you are interested.
Also, having looked at the flat versus the receiver stub, I've decided that the best thing to do is graft the flat onto what's left of the receiver. That means I'm going to have to make a mandrel to get everything lined up properly. I don't have a rotary table for the mill at work, so it will be a homebrew kind of deal, but that's the direction I'm headed.
Are you planning on pressing?
Absolutely if we can borrow a press. Just leaving things a little vague with the recent atf ruling, but I've got the all clear from the loaner program to share with supervision. Maybe we'll call it a "build a bear" party to keep them on their toes.