BREAKING--ATF CRUSHED: Court Declares "Frame and Receiver" Rules ILLEGAL

[Atlasarmory]

Has this been posted anywhere yet ?

 

[Rickman]

And another win for the good guys.

 

[Overboost44]

Let's see what happens in the long run. This would be great. Not that I know anyone with a P80...

 

[E.Shell]

I wonder how far the ATF will appeal this (with our own money)?

 

[CMSGT]

I wonder how far the ATF will appeal this (with our own money)?

DOJ will make the decision to file an appeal or not.

 

[Alan3413]

Not seeing this anywhere else

 

[GTOGUNNER]

Here is the decision.

https://storage.courtlistener.com/recap/gov.uscourts.txnd.366145/gov.uscourts.txnd.366145.56.0_2.pdf

Sent from an undisclosed location.

 

[GTOGUNNER]

Order

Case 4:22-cv-00691-O Document 56 Filed 09/02/22 Page 23 of 23 PageID 732
IV. CONCLUSION
Tactical Machining has shown it is entitled to a preliminary injunction against Defendants’ enforcement of the Final Rule. Accordingly, the Court GRANTS the motion in part, DENIES the motion in part, and ORDERS that Defendants and their officers, agents, servants, and employees are enjoined from implementing and enforcing against Tactical Machining, LLC the provisions in 27 C.F.R. §§ 478.11 and 478.12 that this Order has determined are unlawful. The Court waives the security requirement of Federal Rule of Civil Procedure 65(c). See Kaepa, Inc. v. Achilles Corp., 76 F.3d 624, 628 (5th Cir. 1996). If Plaintiffs wish to submit further briefing and evidence on the scope of the injunction, they must do so no later than September 8, 2022. Any responses are due within seven days of Plaintiffs’ filing.
SO ORDERED on this 2nd day of September, 2022


Sent from an undisclosed location.

 

[Occam]

Reed O’Connor is a G.W. Bush appointee.

It’ll be interesting to see how much the feds think this obvious attempt at regulatory overreach is worth fighting for through appeals.

The case bodes well for other similar Big And Getting Bigger Gubmint issues.

 

[slsc98]

I don’t know who Tactical Machining is (h*ll, I don’t even know WHAT tactical machining is (ninja dressed at the drill press?) but, I can GarAnTee immagunnaownsumma their swag before this weekend ends!

 

[slsc98]

What a refreshing home page:

Tactical Machining: 80% Lowers, AR 15 Uppers and Parts

Best Prices on 80% lowers and fast shipping! Tactical Machining is the best source for 80 percent lowers, build kits & accessories. Our prices can't be beat.

www.tacticalmachining.com

Well, la-dee-da!

 

[Rocinante]

MOAB of a pimp slap incoming:

 

[jcutonilli]

The thing is that this preliminary injunction only applies to Tactical Machining. The frame/receiver rule still applies to everyone else. It is a step in the right direction, but currently only has a minor impact.

 

[Inigoes]

Now, if we could only get the courts to use the same reasoning for bump stocks.

 

[Occam]

The thing is that this preliminary injunction only applies to Tactical Machining. The frame/receiver rule still applies to everyone else. It is a step in the right direction, but currently only has a minor impact.

By definition, yes. But those tea leaves ain’t hard to Reed, if you’ll pardon the pun.

 

[Allen65]

The thing is that this preliminary injunction only applies to Tactical Machining. The frame/receiver rule still applies to everyone else. It is a step in the right direction, but currently only has a minor impact.

If I'm reading the order correctly, it specifically does not apply to TM's customers, so they would still be violating the law by directly buying TM products that violate the new rule. How does this really help TM stay in business if their customers are committing a felony violation of GCA 68 by buying their products?

 

[HaveBlue]

That was a good read. i Hope the plaintiffs provide the court with additional information .

 

[W2D]

If this goes to the logical conclusion, not only could we get P80 frames, we could get P99 kits!


Sent from my iBunker using Tapatalk Pro

 

[Crazytrain]

And... Tactical Machining is closing their doors...

Dear Valued Customer,

We hope this email finds you in good health and high spirits. Today, we are reaching out to express our deepest gratitude for your unwavering support over the past 15 years. Your loyalty and trust have meant the world to us, and it has been an incredible journey serving you all.

However, we have some bittersweet news to share. As of this moment, once our current stock runs out, we will not be manufacturing any more of our beloved products. This decision was not made lightly and comes with a heavy heart.

The reason behind this difficult choice is the challenging landscape created by unconstitutional laws being enforced by the current administration. We've fought long and hard to continue our mission, but unfortunately, the obstacles have become insurmountable, and we must regrettably bow out.

This is a tough moment for us, as we have always strived to provide you with the best products and services. We want to assure you that this decision is not a reflection of our dedication to you, our cherished customers. We've cherished every interaction, every partnership, and every opportunity to serve you.

We want to take this moment to thank you sincerely for the trust you've placed in us, for the feedback that helped us improve, and for the memories we've created together over these 15 incredible years. Your loyalty has been the fuel that powered us through both the highs and lows.

While this chapter may be coming to a close, we are still here to support you and address any questions or concerns you might have during this transition. We have started another company manufacturing gearboxes for trailer jacks, a product that we invented. These will be sold at www.trailergearbox.com, so we will still be around, just not in the firearm parts business. Feel free to reach out to our dedicated customer service team at Sales@tacticalmachining.com or 386-490-4464.

In conclusion, thank you from the bottom of our hearts for being a part of this incredible journey with us. We are deeply grateful for your support, and we will forever cherish the relationships we've built over the years.

Wishing you all the best in your future endeavors, and we hope our paths cross again someday.



With warm regards and heartfelt thanks,

Tactical Machining

 

[Docster]

A temporary injunction is really nothing to celebrate. Only permanent ones are