1" Extension for my can??

[rfawcs]

I would hope that because it is such a short extension, it wouldn't make a huge difference. I am more worried about my own situation, potentially trying to daisy-chain together two of these extensions to make up about a 1.25 inch gap.

See post 10. They made a pitch thread adaptor for me that was two inches long.

 

[outrider58]

I would hope that because it is such a short extension, it wouldn't make a huge difference. I am more worried about my own situation, potentially trying to daisy-chain together two of these extensious to make up about a 1.25 inch gap.

Length has nothing to do with it. Centering does.

 

[j_h_smith]

Normally everyone wants to make their set ups shorter......

Glad it worked out for you. I didn't think such a thing existed and would worry about baffle strikes also. Nice when things go your way!

This would be my concern as well. But I guess time will tell.

Good luck OP.

 

[dreadpirate]

If you are able, run a bore gauge through the whole setup to verify concentrisity.

https://search.yahoo.com/yhs/search...ntering&ei=UTF-8&hspart=mozilla&hsimp=yhs-002

Yes. I will do that, last thing I need is damage to the can. Can't be too cautious.

 

[dreadpirate]

This might work for checking "straightness"

https://www.mcmaster.com/#catalog/123/3758/=18ux2yp

or

http://www.brownells.com/gunsmith-t...ls/fnh-16s-17s-armorer-s-tools-prod55159.aspx

or

https://geissele.com/tools/suppressor-alignment-gage.html

 

[erwos]

See post 10. They made a pitch thread adaptor for me that was two inches long.

Didn't I read somewhere that TROS was having serious customer service issues these days? Recent thing, they were GTG five years ago.

The core problem is that the FAB stock assumes you're suppressing like the Israelis do, which is essentially an integrally suppressed barrel in profile. With a setup like that, you'd flip the barrel tray to the heavy barrel format and not have a problem. (Can you flip the barrel tray to solve this problem without the adapter? Just an idea.)