Susquehannabum
Member
- Jan 2, 2022
- 16
Anybody loading 350 Legend with a 200 grain bullet subsonic?
Not a lot of info out there on powders.
Not a lot of info out there on powders.
Dabbled a bit in it using imr4227 and the lee 358/200 grain gas checked and powder coated bullet. Loaded for a boltgun though, so not sure if they run on a AR.Anybody loading 350 Legend with a 200 grain bullet subsonic?
Not a lot of info out there on powders.
I'm loading for a bolt gun also. Being such a new cartridge, there is not a lot of loading data out there. I have some 2400, Bullseye, H110 and Lil' Gun to work with. H110 and Lil'Gun are not good for reduced loads. Trying to find a safe load.
I’ve used H110 and Lil Gun in .300 BLK subs with success. 220-240 grain projectiles. Cycles fine. Something like 10.5 grains Lil gun is where I landed on those with 220 grain leatherhead bullets. Should be great in a bolt gun.
Lil'gun does some weird things when loaded below the starting load. It's forgiving for 300 blk since the case capacity is alot smaller than 350L. I wouldn't recommend using lil'gun for reduced loads for 350L. I never worked with h110, but i assume it might be a similar case.
Lil'gun does some weird things (incomplete burn, pressure spikes) when loaded below the starting load. It's forgiving for 300 blk since the case capacity is alot smaller than 350L. I wouldn't recommend using lil'gun for reduced loads for 350L. I never worked with h110, but i assume it might be a similar case.