Muleskinner
Ultimate Member
I'm a little perplexed by this issue. I have a DPMS AR-10. It runs commercial ammunition with absolutely no issues. The rifle runs flawlessly and I can ring steel consistently at 500 yards. About 1 out of every three or four of my reloads get stuck in the chamber and I have to use the old mortar method to get the spent case out of the chamber. The odd thing is that they go into and come out of my case gauge completely with no problems and they chamber in the rifle with no problems if I take the upper off and plunk around in the chamber not only does it go in with no resistance if I turn it upside down it falls right out but after the gun is fired about 25% of them get stuck. The rounds themselves are very accurate they are not maximum pressure but the brass simply does not want to come out. If it was doing this with commercial ammunition I would say that I may have a worn extractor but commercial ammunition functions flawlessly. So, has anyone else ever seen this issue and if so what did you do to fix it?