Hey everyone... So shoping for opinions...
Started out with an AR15 build for a pistol version chambered in 300Blk
I knew enough what I wanted on the lower but decided a complete upper was the way to go. Initially tried a 10.5 BCM which worked awesome but when I put a CAN on it I assumed it would even get dirtier. So decided to switch to a Pistol driven. Given my CAN length of appx 7" (JK Armament Form 1 and soon to be Omega300) I was very happy to find Adam Arms 8".
Problem 1. Does not cycle properly... Supers work fine.. Subs not so much. Solution seems to be a change the spring to a Nemo 300 Blk seems to fix the issue.
Problem 2. Seems that there is not sufficient barrel length to get complete burn. So not sure what can be done here except to determine what ammos will work.
There maybe an issue with the Adjustable Gas Block but I did not want to do any exploration. I sent the upper back for factory examination since several of the settings did not seem to have any difference and there seemed to be a regulator problem but one week later I have not received any feedback from Adam Arms... That is a bit worrisome..
So my current solution path is replace the adam arms with a POF 10.5 in piston driven upper. Will need to do some testing to determine if I can get consistent suppressed performance (I am really hoping) so I will have a reliable rifle...
Any and all opinions and feedback will be helpful...
Started out with an AR15 build for a pistol version chambered in 300Blk
I knew enough what I wanted on the lower but decided a complete upper was the way to go. Initially tried a 10.5 BCM which worked awesome but when I put a CAN on it I assumed it would even get dirtier. So decided to switch to a Pistol driven. Given my CAN length of appx 7" (JK Armament Form 1 and soon to be Omega300) I was very happy to find Adam Arms 8".
Problem 1. Does not cycle properly... Supers work fine.. Subs not so much. Solution seems to be a change the spring to a Nemo 300 Blk seems to fix the issue.
Problem 2. Seems that there is not sufficient barrel length to get complete burn. So not sure what can be done here except to determine what ammos will work.
There maybe an issue with the Adjustable Gas Block but I did not want to do any exploration. I sent the upper back for factory examination since several of the settings did not seem to have any difference and there seemed to be a regulator problem but one week later I have not received any feedback from Adam Arms... That is a bit worrisome..
So my current solution path is replace the adam arms with a POF 10.5 in piston driven upper. Will need to do some testing to determine if I can get consistent suppressed performance (I am really hoping) so I will have a reliable rifle...
Any and all opinions and feedback will be helpful...