05dodgedaytona
Ultimate Member
Anyone have any experience with the slides from 5d tactical?
Fauxland Special complete! Now I just need a holster.
Heard on a podcast that later this year polymer80 is planning to release g19 grip that’s compatible with g17 slides.
Brownells has a G19 longslide slide already.
Brownells has a G19 longslide slide already.
what slide on the right? looks more like an FNS than a glone...
Sent from my SM-G955U using Tapatalk
what slide on the right? looks more like an FNS than a glone...
Sent from my SM-G955U using Tapatalk
Suarez
Threw a mag of 115 old crap ammo through the new build and it was a jam o matic. Switched to 124+P ran like a top then dropped another mag of 115 crap ammo and ran fine.
Literally only took 15 rounds of the good stuff but man initially it hated that 115
I would like to hear more about how you did the beveling, because I think my PF940v2 has a slightly-too-large locking block which is causing malfunctions on the OEM slide.Beveled the rear edges of the locking block and threw it in the freezer
I would like to hear more about how you did the beveling, because I think my PF940v2 has a slightly-too-large locking block which is causing malfunctions on the OEM slide.
I would like to hear more about how you did the beveling, because I think my PF940v2 has a slightly-too-large locking block which is causing malfunctions on the OEM slide.
Are you sure that the slide lock spring is fully inserted into it's groove and not interfering with the action spring?So, to be clear, I can get the locking block itself in, I think evenly, but the rails the slide rides on seem too wide. Are you guys altering those at all? The problem is before it ever hits the rear rails, and it doesn't seem like the slide is impacting the frame or anything obvious like that.