clandestine
AR-15 Savant
I just finished the Ruger last week. Wife is dying to shoot it. Wife likes the look but Im thinking about just bead blasting it, brushed just isnt my thing.
SPECS
Heres the Parts I put into it:
-Tactical Innovations Brake 1/2x28 (I use this for a Thread Protector)
-SWR .22 Spectre Sound Suppressor w/ Suppressor Pouch 1/2x28 (Thanks to Mark @ 2A Sales )
-Bushnell Trophy Dot Sight w Sunshade and Rings (Red and Green Illumination and Multiple Reticle Options)
-Black Dog Machine Kydex Holster (Works with Dot Sight, Brake, or Sound Suppressor)
-6 Factory Ruger Magazines
-Hogue Smooth Aluminum Grips
-Hogue Hex Stainless Grip Screws
-Ruger Factory Optics Rail
-VQ Firing Pin
-VQ Adjustable Trigger
-VQ Extractor
-VQ Spring Kit
-LCI Filler (From Rimfire Central)
-Ruger MKII Hammer and MK II Hammer Bushing (Removes/Disables Magazine Disconnect)
-Replaced “V Blade” on Rear Sight with a “Square Blade” Sight
Heres the work I did to it:
-Polished Hammer Face (Helps the Bolt cycle on low velocity ammo)
-Polished Feed Ramp (Improves reliability over a broader range of ammunition)
-Polished and Chamfered bottom of Bolt (Helps the Bolt cycle on low velocity ammo)
-Stoned and Polished Factory Parts to a 2.5# Trigger Job, No Overtravel, No Creep, Minimal Takeup
-Beveled Magazine Well
-Painted Barrel Flutes with Alumahyde
-Ceracoated Minor Parts black to create a “2 Tone” look
-Lapped Barrel (Helps reduce lead buildup, and accuracy degredation)
-Recrowned Barrel
-Cut Threads 1/2x28 and Set Back Front Sight
-Milled Dot Sight Rings for Iron Sight usage
-Blended LCI Filler to Receiver
SPECS
Heres the Parts I put into it:
-Tactical Innovations Brake 1/2x28 (I use this for a Thread Protector)
-SWR .22 Spectre Sound Suppressor w/ Suppressor Pouch 1/2x28 (Thanks to Mark @ 2A Sales )
-Bushnell Trophy Dot Sight w Sunshade and Rings (Red and Green Illumination and Multiple Reticle Options)
-Black Dog Machine Kydex Holster (Works with Dot Sight, Brake, or Sound Suppressor)
-6 Factory Ruger Magazines
-Hogue Smooth Aluminum Grips
-Hogue Hex Stainless Grip Screws
-Ruger Factory Optics Rail
-VQ Firing Pin
-VQ Adjustable Trigger
-VQ Extractor
-VQ Spring Kit
-LCI Filler (From Rimfire Central)
-Ruger MKII Hammer and MK II Hammer Bushing (Removes/Disables Magazine Disconnect)
-Replaced “V Blade” on Rear Sight with a “Square Blade” Sight
Heres the work I did to it:
-Polished Hammer Face (Helps the Bolt cycle on low velocity ammo)
-Polished Feed Ramp (Improves reliability over a broader range of ammunition)
-Polished and Chamfered bottom of Bolt (Helps the Bolt cycle on low velocity ammo)
-Stoned and Polished Factory Parts to a 2.5# Trigger Job, No Overtravel, No Creep, Minimal Takeup
-Beveled Magazine Well
-Painted Barrel Flutes with Alumahyde
-Ceracoated Minor Parts black to create a “2 Tone” look
-Lapped Barrel (Helps reduce lead buildup, and accuracy degredation)
-Recrowned Barrel
-Cut Threads 1/2x28 and Set Back Front Sight
-Milled Dot Sight Rings for Iron Sight usage
-Blended LCI Filler to Receiver