Lex Armarum
Ultimate Member
- Oct 19, 2009
- 3,450
I am looking for load data for the .260 Rem using the following components:
140 gr. Hornady SST
Rem Brass
IMR 4350
I did a search on Hogdon's website and found maximum load data but the website did not give minimum load data. Max load according to the website is 43 gr. of 4350 pushing a 140 Nosler Partition at ~2700FPS.
I'm interested in hearing recipes that work for the above mix as well as accuracy results. If you've used a different powder/components and have had good results with a particular load, I'm interested in hearing about it. The load will primarily be used for hunting at ranges from <100 yds to ~500 yds.
Any and all help is appreciated.
140 gr. Hornady SST
Rem Brass
IMR 4350
I did a search on Hogdon's website and found maximum load data but the website did not give minimum load data. Max load according to the website is 43 gr. of 4350 pushing a 140 Nosler Partition at ~2700FPS.
I'm interested in hearing recipes that work for the above mix as well as accuracy results. If you've used a different powder/components and have had good results with a particular load, I'm interested in hearing about it. The load will primarily be used for hunting at ranges from <100 yds to ~500 yds.
Any and all help is appreciated.