SnuffyJD
Active Member
http://www.mdshooters.com/showthread.php?t=135496
You'll need to check with member cjp45 to see if he still has any available in batch 2.
SHOW US YOUR BLADES
- Thread starter SniperArt
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
http://www.mdshooters.com/showthread.php?t=135496
You'll need to check with member cjp45 to see if he still has any available in batch 2.
NickZac
Ultimate Member
Spyderco-Kershaw SpyKer...awesome knife. It's the only knife to date to utilize Spyderco and Kershaw Ken Onion designs to make a single knife. The Mother of Pearl also gives it an interesting look. This one took me a year to find the right one!!! (pictured with some of my other crap)
Attachments
alucard0822
For great Justice
Had an opportunity to take a pic comparing a few good EDC folders before a couple go out as gifts. The PM2 went to smokey, manix 2light Iis going to dad gave my FIL the ZT350 last year and had it for a sharpen and tuneup.
alucard0822
For great Justice
Yup, good lightweight folder.
You might also like this, you know how many bushings and bulk hose you have to cut to wear out a rescue, I do. About 5 years EDC back in the shop
Yup, good lightweight folder.
You might also like this, you know how many bushings and bulk hose you have to cut to wear out a rescue, I do. About 5 years EDC back in the shop
View attachment 105337
Very cool, I thought I was the only person on earth that owned one.
My rescue is a hand me down from Streetgang. It was my duty and edc knife for years. It REALLY needs a trip back for sharpening.
MDMOUNTAINEER
Glock, AR, Savage Junkie
bshedwick
Active Member
Kershaw Cryo II. And Spyderco Tenacious G-10 black combo blade
I love the spyderco
MDMOUNTAINEER
Glock, AR, Savage Junkie
amoebicmagician
Samopal Goblin
I had a really really nice machete my dad brought home from Thailand. It started to rust really bad, so I cleaned it, ground down into good metal to get rid of the pitting, sharpened it razor sharp, hit with a heat gun and then oxpho blued it.
I don't know what the alloy is, but it took the bluing beautifully, it has almost a reddish tinge to it, like spring steel gets when you blue it.
Anyways, it looks great now, and hasn't rusted even a tiny bit in the years since bluing.
I don't know what the alloy is, but it took the bluing beautifully, it has almost a reddish tinge to it, like spring steel gets when you blue it.
Anyways, it looks great now, and hasn't rusted even a tiny bit in the years since bluing.
rob b
c@r collecting
Dave MP
Retired USA
New blade from my Wife
The Vakra
Total Length 19 in (.48m) Blade/Handle Length 12in/4.25in (.3m/.11m) Steel Width 0.25in
Steel Type 5160 Weight 1lb 15oz (.88kg)
The Vakra
Total Length 19 in (.48m) Blade/Handle Length 12in/4.25in (.3m/.11m) Steel Width 0.25in
Steel Type 5160 Weight 1lb 15oz (.88kg)
MDMOUNTAINEER
Glock, AR, Savage Junkie
I'll give specs in descending order, going left to right when appropriate;
1) (POST 308) 5.25" Blade, 1084 Steel, 57-58hrc, mid-taper, 3/16" thick at the ricasso, forge scale flats, hand-rubbed to a satin 600 grit on the bevels, 10" OAL. OD/Forest scales with red liner, G10.
2) (POST 310) 4.0" Blade, 1084 Steel, 58-59hrc, distal taper, 1/8" thick at the ricasso, forge scale flats, hand-rubbed to a satin 600 grit on the bevels, 8.25" OAL. Red, sculpted G10 scales.
3) 6.5" Blade, 1095 steel, 57-58hrc, distal taper, 3/16" thick at the ricasso, forge scale flats, hand finish to 1200 grit. 11.75" OAL.
4) Guardless Rifleman, 9.25" blade, 57-58hrc, 1084steel, distal taper, sharpened swedge, 3/16" at the ricasso, dyed sunflower scales.
5) Integral Guard Hunter, 4.25" blade of 1084 steel, 3/16 at the ricasso, distal taper, all belly (all cutting surfaces are slightly rounded in profile, makes it a dream to skin with), hand laid (by me) kramcarta scales in OD/Black.
Despite numerous attempts to become an IP on here over the last few months, my requests have been ignored. However, I will respect my current non-IP status by not offering any details related to my business or their sale. In order to buy one, you'll have to know me personally, and have knowledge of my business outside of MDShooters (I will not give my personal info out via PM here, nor will I quote prices or availability here), I will give the technical specs of the pieces I picture upon request. If the mods see to it that I can become an IP, I'd be glad to share all of the above, but not before then.
Crawls
Active Member
Nice collection. Are those last two a Survive Knives 4.1 and a Bark River Aurora? Which do you prefer? I've been looking to get one one of those and I'm on the fence between the two.
mhemling33
Active Member
This isn't a knife but it has blades 
I picked this little guy up at the Jarrettsville VFW Gun show a month or two ago. It was made by the guy who has all the damascus steel knives.... it set me back $40 but I like it so much I might grab another if he has any at one the his next shows.
I picked this little guy up at the Jarrettsville VFW Gun show a month or two ago. It was made by the guy who has all the damascus steel knives.... it set me back $40 but I like it so much I might grab another if he has any at one the his next shows. 
llkoolkeg
Hairy Flaccid Member
I've never seen a pattern-welded Star of David shuriken before...quite cool.
J-Dog
Ultimate Member
- Mar 9, 2012
- 1,789
I don't know jack all about blades, so this is probably the nicest one I've ever had.
My wife got me a Gerber Instant for Christmas, which replaced my busted old no-name folder for EDC.
I've got some other knives lying around, but most are $5 flea market cheapos not worth mention.
My wife got me a Gerber Instant for Christmas, which replaced my busted old no-name folder for EDC.
I've got some other knives lying around, but most are $5 flea market cheapos not worth mention.
MDMOUNTAINEER
Glock, AR, Savage Junkie
NickZac
Ultimate Member
Holy crap the blade grinds on those neckies are aggressive!!!
Those things must slice like a straight razor!!! I love it!!!
Those things must slice like a straight razor!!! I love it!!!
54rndball
take to the hills
This is an old style Bowie made by a guy up in PA who has a forge. The transition is easy to see on the blade.
The blade is pretty thick and could get some good use hog hunting. I haven't stabbed anything with it yet!
The blade is pretty thick and could get some good use hog hunting. I haven't stabbed anything with it yet!
Users who are viewing this thread
Latest posts
Forum statistics
Latest threads
-
-
-
-
-
-
Looking for used guns, optics, and parts, give us a call!- Started by SandSGunsSOMD
- Replies: 0
-
Looking for used guns, optics, and parts, give us a call!
- Started by SandSGunsSOMD
- Replies: 0