If someone lives out of state and has a concealed carry license in that state, can they legally carry a concealed handgun in Maryland while visiting here? Thanks.
Before the laws changed, you needed to take that online gun safety course and present your card for it when you bought a firearm. I've lost that card. Do I still need it or anything like it to buy a Hbar AR? If so, then what's the link to that online safety course. I tried to google it, but...
I've flown with firearms checked in with Southwest four times. The last time was a year and a half ago. I was just going through their baggage policies before my upcoming flight and noticed that the maximum baggage size is 62 linear inched (length + width + height). Anything after that is...
I was interested in getting this upper from BCM:
http://www.bravocompanyusa.com/BCM-BFH-16-LIGHT-WEIGHT-Mid-Length-Upper-p/bcm-urg-mid-16lw-bfh-ss12g2.htm
It comes with the MI SS12G2. I like the idea of a lightweight upper. This handguard is relatively new (about 2 years old), but it's...
I've been using that DILLON CASE LUBE SPRAY for resizing my rifle brass. Then I tumble it again after it's resized to clean off the lube. I think some people soak it in solvent. Any recommendations?
Thanks.
They're in stock as of 2/27, but they're expensive. It's a 5k pack of 75gr for $625. You could probably sell what you didn't need.
http://www.wideners.com/itemview.cfm?dir=278|281|1081|1159
http://www.bravocompanyusa.com/BCM-Standard-16-Mid-Length-Upper-Centurion-Arms-p/bcm-urg-mid-16-c4-12.htm
in stock as of 5:48pm Monday
I just got a notification that a complete Spike's upper is available on Aimsurplus, but their site won't even come up. I guess everybody is trying to get on...
I'm starting to do a lot of bullet pulling, cannibalizing old unwanted loads. I've heard that the brass should be resized from a pulled case, true? Also, any issues with using pulled bullets?
These days my loads are 68 and 75gr Hor and I'm using max loads, varget with 68 and rl15 with 75...
Did the old ban just apply to complete rifles and lowers? We should still be able to buy complete uppers and all the spare parts, right?
It's possible there won't be a new AWB. The NRA is digging in and the Republicans still run the House. If they closed the gun show loophole, tighten...
I've been researching doing an upper build. I already have a BCM barrel and an upper. I'm going to put a free float handguard on, just haven't decided on one. I noticed that most low profile gas blocks use just set screws. Should I mail it to RainierArms or find a gunsmith that will also pin...
I found one so far. It's 10% off the entire order. This is one of my favorite sites for gear. They ship out quickly, offer free shipping and are extremely responsive to inquiries.
http://www.skdtac.com/
This looks awesome. I'd like to get an 18" upper. I wish you could get just a $6 birdcage flash hider instead buying at least the $50 DD one.
https://danieldefense.com/build-your-ddm4
I'm a member at AGC, but I'd like to shoot more than 200 yards. Other than the DelMarVa range, what other ranges are around the Baltimore area (within a 2 1/2 half hour drive). Thanks guys.
I'm new to using a ballistic calculator and I've been messing around with the one on Hornady's website. When I enter the data for a .223 75gr Hornady round, I don't understand why the "trajectory in inches" and "come up in MOA (converted to inches: 1 moa= 3.44")" aren't the same. They should...
I was cruising the net looking at Noveske uppers and I found this one:
http://www.tacticalgeargroup.com/noveske-rifle-works/upper-noveske-5.56mm-light-carbine-14.5-vis/
It's similar to one on their website but it has a 9" rail instead of a 11.5" one...
http://www.vltorstore.com/a5-the-m16-a5-stock-kit/
This looks like a good option if someone wanted to go rifle length without the A2 stock. It's interesting that people in the reviews say they're using it with midlength and carbine gas systems. So I guess that even if you had a lower with...