I have one on my Pardner Protector and 982. There is a picture of my Breacher Protector with the Hogue forend on the first page. It's a tight fit. I had to tap it on with a rubber hammer. It can be removed with a hammer socket that is about the same diameter as the forend tube. Just tap out the...
Something a little different. Here is one of my Norinco made shotguns, the H&R NEF Pardner Protector. Same shotgun as the 982 with a different style receiver. The recoil is very light with the pistol grip stock and muzzle brake. It's a joy to shoot.
SpeedFeed LE Stock
Hogue Forend
Vang...
steampunk
Good job and good writeup. The tube extension looks nice installed.
With standard 2 3/4" shells you should be able to get 7 in the tube with the solid end follower. The spring maybe a little long. You can trim a few coils off but I wouldn't trim it under 25" and shape the end. Some...
The barrel ring on the 870 is set lower than the one on the 982. You need to cut a pipe or tube that will fit over the 982 shotgun mag tube. It needs to fill the space between the 870 barrel ring and the mag cap. So when you screw the mag cap on it will lock the barrel in. It needs to be the...
They are excellent for the money and a steal.
Machined extractor and ejector
Aluminum Trigger
All 870 parts and accessories will fit. The barrels will with a spacer
High carbon steel receiver
Excellent set of GRS
If anyone would like to upgrade the flat head GRS screws with socket head...
You are not really disagreeing with me. You choose not to use the Mossberg safety because it is hard to operate with a pistol grip stock. Just what I said.
I happen to like pistol grip stocks on shotguns. I just don't feel they are good idea on a Mossberg.
A pistol grip only has a very...
That is a Laserlyte tri rail mount. It is well made and low cost. I would keep it simple, Flashlight, heat shield and sling. The Mossberg heat shield is the way to go on a 500. There is no need for a laser that I can think of.
Pistol grip stocks don't work well on a Mossberg because the safety...
AKbythebay It looks very nice not over done. Keep it simple and it will handle well.
The barrel lug ring being higher up the tube extension doesn't need a clamp. The tube ext is only 3.4" long, made of high quality steel and it only has to support the weight of 1.5 shells. I never use clamps...
The extension should screw right off. You can use a pair of channel locks to break it free. Put a thick rag around the base so the CL teeth won't damage the base.
GC
Here is my SPX. I added the following
Vang 500/590 Oversize metal safety
GC oversize bolt handle, The NOB - I custom make these for the 930 SPX.
UTG 500 scope base it is longer and fits better. The factory screws engage more threads.
Barrel tapped for choke tubes and 4" extended cone
Colonial...
I have been working with these shotguns for about 6 years now. This is my opinion of these shotguns and things I have learned from the experience of working on them.
Here is the low down on the Norinco 982 & H&R NEF Pardner Pump:
The Pardner Pump & the Norinco 982 Pump are the same shotgun...
The FN SLP doesn't use a tube extension. It has a one piece shotgun mag tube with a tube sleeve over it. The sleeve is lock down by the mag tube cap. The sleeve makes it appear it has a mag tube ext. A pretty good design but if you want to go past 6+1 capacity it is not possible. You have to buy...