I picked up my Dissent at Tylers and shot 75 rounds of supers yesterday at 50 yards. Since I wanted to "get out and shoot it", I had to cobble up a sight and brace setup. The only red dot I had laying around was a Vortex Crossfire which does not work well with my astigmatism. For a brace, I put together a 1913 adapter, buffer tube and pulled a SB brace off another rifle.
I had several different loads and tried them all at 50 yds. From 123 gn to 150gn both jacketed and powder coat. After zeroing, I was able to shoot a five shot group with Hornady 150gn bullets into a 1.5 group from a 4x4 rest. The rest of the shots were fired off my elbows on a bench and resulted in a 4.5 inch group with some fliers. Not bad considering I was doing double taps as well.
The gun performed perfectly with not one problem. The trigger measured consistently at 5lb 7oz with my Lyman gauge although it felt at least a pound lighter. The let off is super crisp and the reset is @ 1/8 inch. It is a CMMG "Zero" part which I understand is made by a vendor to CMMG specs.
I have ordered an adapter from Griffon for the 5/8-24 threaded barrel so I can put my Obsidian 9 on it and shoot subs. I recommend it and Tylers who sold it to me for 1860 out the door. If you want it in black, it costs an extra $40. That color wasn't in stock so I settled for what ever color (steel
) that I got. Here are some poor pics since my camera flash is intermittent.
I had several different loads and tried them all at 50 yds. From 123 gn to 150gn both jacketed and powder coat. After zeroing, I was able to shoot a five shot group with Hornady 150gn bullets into a 1.5 group from a 4x4 rest. The rest of the shots were fired off my elbows on a bench and resulted in a 4.5 inch group with some fliers. Not bad considering I was doing double taps as well.
The gun performed perfectly with not one problem. The trigger measured consistently at 5lb 7oz with my Lyman gauge although it felt at least a pound lighter. The let off is super crisp and the reset is @ 1/8 inch. It is a CMMG "Zero" part which I understand is made by a vendor to CMMG specs.
I have ordered an adapter from Griffon for the 5/8-24 threaded barrel so I can put my Obsidian 9 on it and shoot subs. I recommend it and Tylers who sold it to me for 1860 out the door. If you want it in black, it costs an extra $40. That color wasn't in stock so I settled for what ever color (steel
) that I got. Here are some poor pics since my camera flash is intermittent.
