Crossbow target

[Melnic]

Myomere have a crossbow target recommendation I can get at Dicks or Basspro or Cabelas?
My Barnet raptor puts them in so deep on my current block that it is hard as hell to take out. Worse for my teen son who is the one practicing.
Maybe different field tips would help also?

 

[wilcam47]

http://www.cabelas.com/product/hunt...targets/_/N-1109587/Ns-CATEGORY_SEQ_337646880

I havent tried this one but we have a reinhart and it still sinks them pretty deep and are difficult to remove the bolts. They do have a lube you can put on the bolts that helps but it makes it harder to get a hold of.

 

[SRD]

Hurricane H28

 

[iH8DemLibz]

The Block.

 

[j_h_smith]

Block Black 18 for me.

 

[DanJo]

I also second the block. I have a 20" Block and it works great for my compound. Easiest target I have had pulling arrows from.

 

[vinjet700]

The Block.

 

[Neot]

The Block.

+1 for this as well

 

[Blackstar65]

http://www.amazon.com/Morrell-Bonecollector-Double-Broadhead-Target/dp/B005D2H0FS.

Dicks has these. They are good for up to 400fps. I have one that I use with my bcx extreme.

 

[Inigoes]

A must have:

http://www.bowhuntingoutlet.com/gorillagrip-arrow_puller.html?gclid=CI6f1ou7hMgCFQ6RHwodJO0N5w

 

[Melnic]

A must have:

http://www.bowhuntingoutlet.com/gorillagrip-arrow_puller.html?gclid=CI6f1ou7hMgCFQ6RHwodJO0N5w

yea, I have something similar, but even with this, if the bolt is so deep down to the fletching its a real beeeyach.

No issues with my bow.

 

[lax]

if you arent using the broadheads its real hard to stop a bag style target

 

[Melnic]

I got this sunday. It was the only thing they had at Cabelas on my way through and my son was chomping at the bit cause he had to get the scope sighted in.
http://www.cabelas.com/product/hunt...uts?destination=/catalog/browse.cmd?N=1109587

It was SOOO easy to pull it out, Only issue is that if you don't screw the tips on all the way, one shot some of the fiber mesh from the inside got caught between the tip and the bolt into a groove there, I had to yank and disembowel the mech out then cut it off and stuff back in. Other than that, it worked like a champ for the I'd say 30 shots we took. I still would like to get a block cause this one I got won't work on broadheads.
My son still has some work left to do on sighting it in and making a table for the scope lines. I still have to research how to be effective on doing that.

 

[AssMan]

I also use the block. Bought an arrow puller too. It's hard to pull bolts from the Block without one.


Sent from my iPhone using Tapatalk

 

[Inigoes]

I also use the block. Bought an arrow puller too. It's hard to pull bolts from the Block without one.

Sent from my iPhone using Tapatalk

A way to make a block more dense: tighten a cargo strap around it.

You might lose an inch or two, but the block has a little more gripping power to catch the bolts a little faster.

 

[Tracker]

I bought a Morrell's Yellow Jacket Field-Point Supreme target for $40 at WM and have the same crossbow as you. It works fine stops arrows great and easy to remove one handed.