350 Legend Subsonic

The #1 community for Gun Owners of the Northeast

Member Benefits:

  • No ad networks!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Susquehannabum

    Junior Member
    Jan 2, 2022
    14
    Anybody loading 350 Legend with a 200 grain bullet subsonic?
    Not a lot of info out there on powders.
     

    guzma393

    Member
    Jan 15, 2020
    488
    Columbia, MD
    Anybody loading 350 Legend with a 200 grain bullet subsonic?

    Not a lot of info out there on powders.
    Dabbled a bit in it using imr4227 and the lee 358/200 grain gas checked and powder coated bullet. Loaded for a boltgun though, so not sure if they run on a AR.

    Sent from my Moto G (5) Plus using Tapatalk
     

    Susquehannabum

    Junior Member
    Jan 2, 2022
    14
    I'm loading for a bolt gun also. Being such a new cartridge, there is not a lot of loading data out there. I have some 2400, Bullseye, H110 and Lil' Gun to work with. H110 and Lil'Gun are not good for reduced loads. Trying to find a safe load.
     

    teratos

    My hair is amazing
    MDS Supporter
    Jan 22, 2009
    45,401
    Bel Air
    I'm loading for a bolt gun also. Being such a new cartridge, there is not a lot of loading data out there. I have some 2400, Bullseye, H110 and Lil' Gun to work with. H110 and Lil'Gun are not good for reduced loads. Trying to find a safe load.

    I’ve used H110 and Lil Gun in .300 BLK subs with success. 220-240 grain projectiles. Cycles fine. Something like 10.5 grains Lil gun is where I landed on those with 220 grain leatherhead bullets. Should be great in a bolt gun.
     

    guzma393

    Member
    Jan 15, 2020
    488
    Columbia, MD
    I’ve used H110 and Lil Gun in .300 BLK subs with success. 220-240 grain projectiles. Cycles fine. Something like 10.5 grains Lil gun is where I landed on those with 220 grain leatherhead bullets. Should be great in a bolt gun.

    Lil'gun does some weird things (incomplete burn, pressure spikes) when loaded below the starting load. It's forgiving for 300 blk since the case capacity is alot smaller than 350L. I wouldn't recommend using lil'gun for reduced loads for 350L. I never worked with h110, but i assume it might be a similar case.
     

    teratos

    My hair is amazing
    MDS Supporter
    Jan 22, 2009
    45,401
    Bel Air
    Lil'gun does some weird things when loaded below the starting load. It's forgiving for 300 blk since the case capacity is alot smaller than 350L. I wouldn't recommend using lil'gun for reduced loads for 350L. I never worked with h110, but i assume it might be a similar case.

    Ah. Good to know. Thank you!
     

    Melnic

    Active Member
    MDS Supporter
    Dec 27, 2012
    12,996
    HoCo
    It would be good to see if Trailboss worked out for subs. I"ve used Trailboss in 308 subsonic.
     

    Susquehannabum

    Junior Member
    Jan 2, 2022
    14
    I've read everything I could find on the CB site about sub loads in 350L. Of course I have plenty of the not recommended powder. H110 and Lil'Gun. Looks like Norma 200 is very good for sub loads but it's impossible to find right now.
    I have a whole 8lb jug of Bullseye and some 2400. I'm hoping to find someone that has tried one of them.
     

    Susquehannabum

    Junior Member
    Jan 2, 2022
    14
    I think 2400 would work also. I used it in 44 Mag and 22 Hornet in the past. Would like to see some published data before loading some up.
     

    Seabee

    Old Timer
    Oct 9, 2011
    514
    Left marylandistan to NC
    Lil'gun does some weird things (incomplete burn, pressure spikes) when loaded below the starting load. It's forgiving for 300 blk since the case capacity is alot smaller than 350L. I wouldn't recommend using lil'gun for reduced loads for 350L. I never worked with h110, but i assume it might be a similar case.

    ^^^this
     
    Top Bottom