Where to buy custom bullet molds?

[hvymax]

I call on the braintrust here to help me find somebody to make a 70cal 1000gr bullet. 700Nitro Express bullets cost an arm and a leg so I need a mold for my ultra slugs. Anybody done this before? How did it work out?

[BenL]

Lehigh will make custom bullets, but they won't be cheap.

http://www.lehighbullets.com/

[hvymax]

Originally Posted by BenL

Lehigh will make custom bullets, but they won't be cheap.

http://www.lehighbullets.com/

They only make bullets. I can get expensive bullets I need a mold to make my own.

[pop-gunner]

Try here.

http://www.hochmoulds.com/index-1.htm

[Rockzilla]

try these people they may be able to help you

Ballard Moulds
Box 298
Clancy, MT 59634
406-933-8217

NEI Handtools, Inc
51583 Columbia River Highway
Scappoose, OR 97056
503-543-6776
I haven't check the above.

try this site also there is a list posted there:
http://castboolits.gunloads.com/showthread.php?t=6031


-Rock

[hvymax]

Thanks Emails sent

[Kinbote]

http://www.ballisticproducts.com/12g...tinfo/0721612/

Those are 600 gr slugs.

The Lyman mold casts 525gr slugs:

http://www.midsouthshooterssupply.co...u=000152654112

They are flat on the top and bottom, so you could stack two of them and get 1050. Cast them from WW and they'd probably weigh about 1000gr exactly. Don't know if you'd want to glue them together or not.

[JSW]

I gotten BP 58 cal moulds from them takes a little while but prices are not too bad.

here is drawing of .715---1200 gr slug from them.

http://www.neihandtools.com/catalog.html

[Flash]

http://www.accuratemolds.com/

[303_enfield]

Go here and ask. It has already been done.
http://castboolits.gunloads.com/forumdisplay.php?f=53

I think NOE was the builder.

[boule]

Ever wondered that Lee might just be enough?

http://www.leeprecision.com/html/cat...ml#CUSTOMMOLDS