TGR
Active Member
Glock 34 Gen 4 MOS with Vogel Trigger. Everything else is stock. 10K+ rounds thru it with never a problem. Shoot the same load of 147 plated over 3.2 Bullseye since set up. Shoots 950 fps
Lately been getting the slide locking back at various times mid-magazine.
The load is a very light load but has functioned perfectly in the gun since I worked it up many 1000s of rounds ago. If it was too light and stove piping or ejecting but not picking up a new round I'd understand, but it ejects the spent shell and locks back with rounds still in the magazine.
Happens with new and old mags.
Tried running the gun well oiled and with minimal oil as I normally do. No difference.
Internals look good.
Grip hasn't changed in years. Im not thumbing the slide stop lever.
Any suggestions?
Lately been getting the slide locking back at various times mid-magazine.
The load is a very light load but has functioned perfectly in the gun since I worked it up many 1000s of rounds ago. If it was too light and stove piping or ejecting but not picking up a new round I'd understand, but it ejects the spent shell and locks back with rounds still in the magazine.
Happens with new and old mags.
Tried running the gun well oiled and with minimal oil as I normally do. No difference.
Internals look good.
Grip hasn't changed in years. Im not thumbing the slide stop lever.
Any suggestions?