Poly80 porn..

cantstop · Jan 14, 2019

budman93 said:
Can anyone help me with this question?

OK, I'm not a gunsmith. You need to figure this out for yourself. This info might help. YMMV

If there is already a channel liner installed, you will not be able to insert a second one. Try to insert one with the tool by hand. You'll know if it's going in or not. You can't install 2 channel liners and the striker assy in an upper. They just won't fit.

budman93 · Jan 14, 2019

cantstop said:
OK, I'm not a gunsmith. You need to figure this out for yourself. This info might help. YMMV

If there is already a channel liner installed, you will not be able to insert a second one. Try to insert one with the tool by hand. You'll know if it's going in or not. You can't install 2 channel liners and the striker assy in an upper. They just won't fit.

I'm fairly certain it already has one. Strangely there are not really any good pictures of glock striker channels with or without liners anywhere that I could find online. I haven't gotten the parts kit in yet to check and see if another will fit.

TripleEight · Jan 14, 2019

budman93 said:
Can anyone help me with this question?

The spring cups should fit pretty snug in the channel liner. You can put the spring on the firing pin with the spring cups and see if goes in tight to check if there is a channel liner. If it wobbles a lot then you know there is no liner installed.
This thread shows an example pic of a slide without a liner. https://www.glocktalk.com/threads/have-any-of-you-guys-had-channel-liner-issues.1571650/

Russ D · Jan 14, 2019

The P80 lower on a G34 is an amazingly well balanced pistol. I love everything about the grip angle and feel of that lower on the longer slide. Just be sure to start with a 13# spring. The 34 upper is pretty flat set up that way.

budman93 · Jan 14, 2019

TripleEight said:
The spring cups should fit pretty snug in the channel liner. You can put the spring on the firing pin with the spring cups and see if goes in tight to check if there is a channel liner. If it wobbles a lot then you know there is no liner installed.
This thread shows an example pic of a slide without a liner. https://www.glocktalk.com/threads/have-any-of-you-guys-had-channel-liner-issues.1571650/

good tip

CrabcakesAndFootball · Jan 14, 2019

Anyone seen the Poly 80 frames for sale at Chantilly or any other local gun show? I have not, but can't say I've ever look for them either.

ironpony · Jan 14, 2019

CrabcakesAndFootball said:
Anyone seen the Poly 80 frames for sale at Chantilly or any other local gun show? I have not, but can't say I've ever look for them either.

Yes I did see them at Chantilly two shows ago I believe.

cantstop · Jan 14, 2019

There was a guy at Timonium last weekend. Here wanted $190 ish for the frames and $600 ish for complete Glock slides.

CrabcakesAndFootball · Jan 14, 2019

Thanks.

StantonCree · Jan 14, 2019

cantstop said:
There was a guy at Timonium last weekend. Here wanted $190 ish for the frames and $600 ish for complete Glock slides.

A guy? You mean a raper

Sundazes · Jan 14, 2019

cantstop said:
There was a guy at Timonium last weekend. Here wanted $190 ish for the frames and $600 ish for complete Glock slides.

I think he comes to every Timo show. I talked to him at the last one and shocked at his prices....

Shamr0ck · Jan 14, 2019

cantstop said:
There was a guy at Timonium last weekend. Here wanted $190 ish for the frames and $600 ish for complete Glock slides.

Chantilly prices were $115-125 for the 80% frame. One guy was selling entire kits but I didn’t hang around long enough to hear his price.

Sent from my iPhone using Tapatalk

Racer Doug14 · Jan 14, 2019

cantstop said:
There was a guy at Timonium last weekend. Here wanted $190 ish for the frames and $600 ish for complete Glock slides.

He'll sell some to MGA's staff members for presentations.

dmable44 · Jan 14, 2019

ironpony said:
Yes I did see them at Chantilly two shows ago I believe.

I bought two P80 frames for $110 a piece there. JSD Supply if I remember correctly. Had factory lower completion kits for $80 but I knew where I could find them for half that.

kraftyone · Jan 14, 2019

#2 done

Art3 · Jan 14, 2019

kraftyone said:
#2 done

MasterChief would approve of that color scheme!

2015-spring-halo-mega-bloks-toy-sets-feature-master-chief.jpg

Art3 · Jan 14, 2019

Art3 said:
Dayum! If you had asked me if I would like a compensated gold barrel with a peak-a-boo slide before seeing this pic, I'd have probably just laughed and said, "no...I'm actually not a pimp." After seeing it though... Nice work So...uhh...what are the specs on that one

Pardon my ignorance, but how did you get the G34 to work? I was under the impression that the 34 came out as Gen4, and the Poly's were Gen3 (and not compatible)

A little searching answered my question...G34 slides are available as Gen3. I've always respected Glocks, but never liked the way they felt. Two things have changed that for me in the past year: buying a G34 (for some reason, the nose heaviness makes it handle better for me), and feeling the "better" Poly80 grip angle.

The thought of putting those two together...makes me quiver :shocking:

And tell me this isn't the freakin' Nintendo Zapper: :party29:

https://www.lonewolfdist.com/Detail.aspx?PROD=922920

(It's too bad they'll probably be banned before I can afford to make it happen :mad54:

)

Art3 · Jan 14, 2019

budman93 said:
Can anyone help me with this question?

The liner is plastic. If you poke down in there with something, you should be able to feel the difference. To me, it does not look like there is one in there. :shrug:

PYR · Jan 14, 2019

Tin is in, totally digging both the all black n the ODG builds. Still deciding on what comp I’m gonna try.

Docster · Jan 15, 2019

Docster said:
We'll see. Yesterday I sent a text to them through their site about the new announced ship date and Ray called back in 3 minutes confirming. Besides talking about what I've already mentioned in previous post he gave me a 20% off sitewide code to share with my motorcycle club since some of the guys told me they missed the big sale that I got before Christmas. The company also sells other parts and I've not seen/heard of any complaints there.

Was very specific about how many PF45s he ordered, how many he expected to receive, and told me my place on the list.

I'm more optimistic than before.

Quoting my own post

Ray from 21 SportsTactical says I can share the 20% off site wide discount with friends. With the freebie promos offered including free shipping that's one hell of a deal.

PM me

Poly80 porn..

The #1 community for Gun Owners of the Northeast

Member Benefits:

Pentultimate Member

Ultimate Member

Active Member

Ultimate Member

Ultimate Member

Active Member

Member

Pentultimate Member

Active Member

Watch your beer

Throbbing Member

Ultimate Member

Thread killer

Active Member

Active Member

Eqinsu Ocha

Eqinsu Ocha

Eqinsu Ocha

Active Member

Attachments

Ultimate Member

Users who are viewing this thread

Log in

Forum statistics