http://palmettostatearmory.com/inde...ped-upper-without-bcg-or-charging-handle.html
No charge handle or BCG...but there ya go.
No charge handle or BCG...but there ya go.
PSA Complete Upper available now 2/21
- Thread starter vector03
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
Wojo
What's that Smell
Stripped Upper... Not complete. Atleast where the link took me...
Labeled as stripped upper but lists specs for 16'' barrel?
Full specs lists
Details
Barrel: 16" Chrome-lined, chrome moly vanadium. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a carbine-length gas system. The M4 profile barrel is high pressure tested and magnetic particle inspected and then phosphate coated. Barrel is finished off with an .750" diameter F-marked front sight base with sling swivel, standard handguards and an A2 flash hider. Barrel is made for us right here in SC by FN Manufacturing.
Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, T-marks, these upper upper receivers are made for us right here in the USA.
Each upper is assembled to order with US-made parts, and test fired to check gas function. Does not include bolt carrier group or charging handle.
Full specs lists
- 16" Barrel length
- Chrome moly vanadium barrel
- 5.56 Nato Chamber
- 1 in 7" twist rate
- Chrome-lined bore
- HPT/MPI Barrel
- M4 Feed ramps
- F-Marked Front sight post
- A2 Flash Hider
- Sling Loop
- Standard Hand Guards w/ heat shields
- Forged upper receiver
- T-Marks
Details
Barrel: 16" Chrome-lined, chrome moly vanadium. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a carbine-length gas system. The M4 profile barrel is high pressure tested and magnetic particle inspected and then phosphate coated. Barrel is finished off with an .750" diameter F-marked front sight base with sling swivel, standard handguards and an A2 flash hider. Barrel is made for us right here in SC by FN Manufacturing.
Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, T-marks, these upper upper receivers are made for us right here in the USA.
Each upper is assembled to order with US-made parts, and test fired to check gas function. Does not include bolt carrier group or charging handle.
rem87062597
Annapolis, MD
- Jul 13, 2012
- 641
I got the 16" midlength, received it yesterday. The upper is complete (dust cover, forward assist, that sort of thing). It just doesn't have the bolt carrier group or charging handle. It's still a deal at $399 smack in the middle of the panic.
So this doesn't come with forward assist and other things? It shows them in the picture... 
You already received yours? How long did it take?
You already received yours? How long did it take?
Wojo
What's that Smell
Weird. Does not give me a warm and fuzzy. Picture i see is just a stripped. Good find though
Wojo
What's that Smell
Dont know what my browser was doing... Now see the correct one... M4 look
Wojo
What's that Smell
It is... Trying to listen to all the SB 281 $hit too.
It's a good deL. can not believe they are still in stock!
It's a good deL. can not believe they are still in stock!
rem87062597
Annapolis, MD
- Jul 13, 2012
- 641
So this doesn't come with forward assist and other things? It shows them in the picture...
You already received yours? How long did it take?
Ordered 2/11. I'm still waiting on a classic lower build kit minus trigger assembly ordered from them on 2/5, it seems like uppers are on a different shipping queue than everything else.
Edit: literally just recived my shipping information for my lower build kit, it should be here by Monday. Now for the very long wait for my lower (and BCG/charging handle).
Attachments
Yeah I'm listening as well.
I'd buy this but I want to build/buy a lightweight upper...looking for a pencil barrel.
Justin B.C.
Walken is a scary clown!!
- Dec 25, 2012
- 892
I got this one when it was up a couple weeks ago. Seems solid, but haven't fired through it yet. Still waiting on my LPK from PSA to come in.
Screwatts
Active Member
Sold out lol
Users who are viewing this thread
Latest posts
-
MDS Team Building. Intro to Pistol AND Rifle with Ninja. July 27&28 Clear Run, NC. (8 Viewers)- Latest: r3t1awr3yd
-
-
-
-
Forum statistics
Latest threads
-
-
-
-
-
-
-
PG County getting some Liberty Doll love over a bill that would ban computers for minors (2 Viewers)- Started by jc1240
- Replies: 6