Hornady lock n load AP vs ???

Viper21773 · Jan 24, 2015

Jmorrismetal said:
The reason I prefer the 650 over the LNL is because the 650 can be configured to do things that you just can't do with an LNL.

Please give details

Jaybeez · Jan 24, 2015

Viper21773 said:
Please give details

you can add a swage to remove the crimps on military brass on the 650. you can also add a motorized autodrive to the 650.

Viper21773 · Jan 24, 2015

Jaybeez said:
you can add a swage to remove the crimps on military brass on the 650. you can also add a motorized autodrive to the 650.

I've done a quick search and can't find any info for an accessory for the 650 to swage primer pockets.
Could you give me a link or source please?

Autodrives are adaptable to many machines.

DaemonAssassin · Jan 24, 2015

Viper21773 said:
I've done a quick search and can't find any info for an accessory for the 650 to swage primer pockets.
Could you give me a link or source please?

Autodrives are adaptable to many machines.

The Dillon Super Swage.

Viper21773 · Jan 24, 2015

DaemonAssassin said:
The Dillon Super Swage.

The only info I can find on The Dillon Super Swage is for a bench mounted tool, not an accessory for the 650

LocknLoad · Jan 24, 2015

I've got the Hornady lock n load and love it. No issues after many thousands of rounds...throw in the 'free bullets' just for buying it, and it is amazingly inexpensive.

coopermania · Jan 24, 2015

Viper21773 said:
I've done a quick search and can't find any info for an accessory for the 650 to swage primer pockets.
Could you give me a link or source please?

Autodrives are adaptable to many machines.

Its not sold by Dillon, Aftermarket sold online. I kinna remember reading somewhere Dillon does not recommend using a swedger on one of there press's.

GS Custom swagger

http://www.ebay.com/itm/G-S-Custom-...for-Dillon-RL550-223-308-9mm-45-/321646577820

Flipz · Jan 24, 2015

Jaybeez said:
you can add a swage to remove the crimps on military brass on the 650. you can also add a motorized autodrive to the 650.

Same can be done on an LNL

coopermania said:
Its not sold by Dillon, Aftermarket sold online. I kinna remember reading somewhere Dillon does not recommend using a swedger on one of there press's.

GS Custom swagger

http://www.ebay.com/itm/G-S-Custom-...for-Dillon-RL550-223-308-9mm-45-/321646577820

Hornady Lock N Load Swage Tool

Viper21773 · Jan 24, 2015

coopermania said:
Its not sold by Dillon, Aftermarket sold online. I kinna remember reading somewhere Dillon does not recommend using a swedger on one of there press's.

GS Custom swagger

http://www.ebay.com/itm/G-S-Custom-...for-Dillon-RL550-223-308-9mm-45-/321646577820

Flipz said:
Same can be done on an LNL

Hornady Lock N Load Swage Tool

Thanks. I was not aware that swagers were available for either press.

Jmorrismetal · Jan 24, 2015

I would not swage with the 650 as Dillon has already said it voids the warrenty.

The 650 is one of only two machines that I know of that allows you to retain a powder check, wit a bullet feeder and seat, then crimp in two different stations.

like this.

https://www.youtube.com/watch?v=T3hVi6PuduM&feature=youtube_gdata_player

guthook · Jan 25, 2015

DERAIL! Just saw this video and had to share.

Jmorrismetal · Jan 25, 2015

I have a PLC controlled 1050 too.

https://www.youtube.com/watch?v=MrFhnDQ-eUU&feature=youtube_gdata_player

Big difference between a 650 and one of them. Cost being a big difference too,

Hornady lock n load AP vs ???

The #1 community for Gun Owners of the Northeast

Member Benefits:

Viper21773

Active Member

Jaybeez

Ultimate Member

Viper21773

Active Member

DaemonAssassin

Why should we Free BSD?

Viper21773

Active Member

LocknLoad

Active Member

coopermania

Banned

Flipz

Ultimate Member

Viper21773

Active Member

Jmorrismetal

Active Member

guthook

Grrr.

Jmorrismetal

Active Member

Users who are viewing this thread

Latest posts

Forum statistics

Latest threads

Forum statistics

Share this page