*** Lever Action Porn ***

The #1 community for Gun Owners of the Northeast

Member Benefits:

  • No ad networks!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Clifjr

    Active Member
    Feb 2, 2014
    966
    Germantown
    When you started the bluing, did you rinse off with water after each bluing application, dry and and then continue to apply the bluing?

    Or did you just apply the bluing once?

    .

    I covered the receiver with the bluing liquid, let drip off for about 10-20 seconds and then rinsed with cold water. My first attempt it looked as if the the bluing was puddling so I took the steel wool to it and reapplied the two different bluing liquids. Did not dry it until I was happy with the look of the blue. Once it was almost dry I wiped it down with supplied oil wipes in the kit but I didn’t like it’s coverage so I sprayed the whole receiver with Breakfree. Let that soak in for about half an hour to a hour and then wiped the excess off. Then I let it cure for two days before I reinstalled anything.
     

    willtill

    The Dude Abides
    MDS Supporter
    May 15, 2007
    24,556
    I covered the receiver with the bluing liquid, let drip off for about 10-20 seconds and then rinsed with cold water. My first attempt it looked as if the the bluing was puddling so I took the steel wool to it and reapplied the two different bluing liquids. Did not dry it until I was happy with the look of the blue. Once it was almost dry I wiped it down with supplied oil wipes in the kit but I didn’t like it’s coverage so I sprayed the whole receiver with Breakfree. Let that soak in for about half an hour to a hour and then wiped the excess off. Then I let it cure for two days before I reinstalled anything.

    Interesting. I guess there's different techniques for cold bluing then. I did the water neutralizing method previously and it was coming out very splotchy, although my surface prep was correct.

    .
     

    Clifjr

    Active Member
    Feb 2, 2014
    966
    Germantown
    Interesting. I guess there's different techniques for cold bluing then. I did the water neutralizing method previously and it was coming out very splotchy, although my surface prep was correct.

    .
    One thing I was thinking about was the water. I’m on a well water system here and it is unfiltered. I was worried about what the effect would be as I would think the BC kit was designed for a filtered tap water system. I don’t know if this had any effect or not.
     

    Mark75H

    MD Wear&Carry Instructor
    Industry Partner
    MDS Supporter
    Sep 25, 2011
    17,256
    Outside the Gates
    One thing I was thinking about was the water. I’m on a well water system here and it is unfiltered. I was worried about what the effect would be as I would think the BC kit was designed for a filtered tap water system. I don’t know if this had any effect or not.

    If you are concerned about the pH of your tap water, just buy a gallon of distilled water from the grocery store
     

    Mini14tac

    Ultimate Member
    MDS Supporter
    May 14, 2013
    2,155
    North County
    Well, I thought I was done with my lever action purchases:D On a whim I picked up this new Henry H001 from Gander Outdoors in York. Lets call it a Fathers Day gift to myself. They have it priced @ $289.99 and they had a 10% off online code so I had it shipped to the York store for $260.99 plus tax was $276.65 out the door. I am really impressed with the walnut furniture, fit, finish and smoothness of the action. If it shoots as good as it looks it should be a keeper.:thumbsup:
     

    Attachments

    • Henry 1.jpg
      Henry 1.jpg
      68.9 KB · Views: 370
    • Henry 2.jpg
      Henry 2.jpg
      66.4 KB · Views: 352

    willtill

    The Dude Abides
    MDS Supporter
    May 15, 2007
    24,556
    Well, I thought I was done with my lever action purchases:D On a whim I picked up this new Henry H001 from Gander Outdoors in York. Lets call it a Fathers Day gift to myself. They have it priced @ $289.99 and they had a 10% off online code so I had it shipped to the York store for $260.99 plus tax was $276.65 out the door. I am really impressed with the walnut furniture, fit, finish and smoothness of the action. If it shoots as good as it looks it should be a keeper.:thumbsup:

    Beautiful :cool:


    .
     

    CJB762

    Active Member
    Jul 5, 2012
    497
    Field and Stream writer says lever action rifles are officially obsolete due to the obsession with long range shooting:



    https://www.fieldandstream.com/play-taps-for-lever-action



    Hogwash....it’s all the wanna be “snipers” out there.

    I’ve got long range rifles. They are fun to shoot. Unfortunately I don’t have a range longer than 150 yds. Maybe if I did I would enjoy them more.

    I think it’s the inner cowboy in me but something makes me giggle when I shoot the old lever actions. My 10 yr old nephew has a blast with them. He keeps the newest Henry catalog next to his bed and looks at it all the time. Just like I did as a kid drooling over the Montgomery Wards and Sears catalogs while looking at the Winchester’s and Marlins.

    I think there is enough of us here in this thread to keep them going at least a little while longer.


    Sent from my iPhone using Tapatalk
     

    BossmanPJ

    Ultimate Member
    Feb 22, 2013
    7,059
    Cecil County
    Hogwash....it’s all the wanna be “snipers” out there.

    I’ve got long range rifles. They are fun to shoot. Unfortunately I don’t have a range longer than 150 yds. Maybe if I did I would enjoy them more.

    I think it’s the inner cowboy in me but something makes me giggle when I shoot the old lever actions. My 10 yr old nephew has a blast with them. He keeps the newest Henry catalog next to his bed and looks at it all the time. Just like I did as a kid drooling over the Montgomery Wards and Sears catalogs while looking at the Winchester’s and Marlins.

    I think there is enough of us here in this thread to keep them going at least a little while longer.


    Sent from my iPhone using Tapatalk

    Amen brother. I shoot with two good friends regularly. We are all into levers more than any other firearms.
     

    Uncle Duke

    Ultimate Member
    MDS Supporter
    Feb 2, 2013
    11,723
    Not Far Enough from the City
    Most nowadays have never grabbed a lever action for "long range" work, any more than they tend to grab a revolver for maximum cartridge capacity.

    Still for yesterday and today and tomorrow, there's usually long enough and capacity enough.
     

    steveh326

    Ultimate Member
    Mar 23, 2012
    1,602
    Mt. Airy
    with any luck I will have time today to pick up my new-to-me 1895. I chuckle every time I think of it as a 100 year old design 'military grade assault rifle'.

    love my old 336 in 30-30 hoping this one earns a spot in my heart also.
     

    Mini14tac

    Ultimate Member
    MDS Supporter
    May 14, 2013
    2,155
    North County
    with any luck I will have time today to pick up my new-to-me 1895. I chuckle every time I think of it as a 100 year old design 'military grade assault rifle'.

    love my old 336 in 30-30 hoping this one earns a spot in my heart also.

    If a Marlin 1895 in 45-70 does not earn a spot in your heart, it will sure leave it's mark on your shoulder if you are shooting some of these new hot buffalo loads:D
     

    steveh326

    Ultimate Member
    Mar 23, 2012
    1,602
    Mt. Airy
    new-to-me Marlin 1895 GSBL I picked up yesterday. Unfired, but sold as used because it was a dealer display. this model was discontinued, so once I decided this was the model I wanted I figured I better get one sooner rather than later because supply is slowly drying up on them. I like the fact that it's a classic design updated with modern touches like stainless, fiber optics, etc. I really wanted something I did not have to worry about in bad weather. this is actually a stainless rifle, not blued, treated with some kind of process that turns the metal black.

    Last night I got the scope mounted (simple Weaver 2.5-7 on see-thru mounts) and got the lever wrapped in the same paracord used in the sling (thanks youtube). I know quality was lacking on some of these when Remington took over but this one looks ok so far and seems to function fine.

    so this is my high capacity, military grade assault rifle, albeit from 100 years ago.

    I gotta head to WV today and tomorrow, hoping to maybe get it to the range sunday morning to get it sighted in and see how bad the recoil is. I have 2 boxes of 45-70, but not sure how many rounds my shoulder will take in one sitting.
     

    Attachments

    • Marlin1895.jpg
      Marlin1895.jpg
      65.5 KB · Views: 880

    Mini14tac

    Ultimate Member
    MDS Supporter
    May 14, 2013
    2,155
    North County
    new-to-me Marlin 1895 GSBL I picked up yesterday. Unfired, but sold as used because it was a dealer display. this model was discontinued, so once I decided this was the model I wanted I figured I better get one sooner rather than later because supply is slowly drying up on them. I like the fact that it's a classic design updated with modern touches like stainless, fiber optics, etc. I really wanted something I did not have to worry about in bad weather. this is actually a stainless rifle, not blued, treated with some kind of process that turns the metal black.

    Last night I got the scope mounted (simple Weaver 2.5-7 on see-thru mounts) and got the lever wrapped in the same paracord used in the sling (thanks youtube). I know quality was lacking on some of these when Remington took over but this one looks ok so far and seems to function fine.

    so this is my high capacity, military grade assault rifle, albeit from 100 years ago.

    I gotta head to WV today and tomorrow, hoping to maybe get it to the range sunday morning to get it sighted in and see how bad the recoil is. I have 2 boxes of 45-70, but not sure how many rounds my shoulder will take in one sitting.

    Nice! The Remington Core-Lokt 405 grain are very light on recoil. As you start to step up in velocity is when she will start to kick a bit. The difference between the Hornady LEVERevolution 325 FTX and the Rem Core-Lokt is noticeable but still not bad. When you start getting into the heavier rounds at higher velocity is when it will start to kick harder. When I picked up my 1895 Guide Gun, one of my buddies asked me what I was going to hunt with that. My reply was any damn thing I want on this continent.
     

    steveh326

    Ultimate Member
    Mar 23, 2012
    1,602
    Mt. Airy
    Nice! The Remington Core-Lokt 405 grain are very light on recoil. As you start to step up in velocity is when she will start to kick a bit. The difference between the Hornady LEVERevolution 325 FTX and the Rem Core-Lokt is noticeable but still not bad. When you start getting into the heavier rounds at higher velocity is when it will start to kick harder. When I picked up my 1895 Guide Gun, one of my buddies asked me what I was going to hunt with that. My reply was any damn thing I want on this continent.

    ran a box of the 405 grains thru it today on the bench to sight it in and get the feel for it... very happy with it and it's accuracy. you were right, recoil not bad at all with these, even from the bench. our range was a swamp from all the rain, so I only shot out to 50 yards this trip. I know only 50 yards, but last 4 rounds went into 3 holes so I was satisfied with this Remlin.
     

    Attachments

    • 1895 at 50.jpg
      1895 at 50.jpg
      75.1 KB · Views: 466

    Users who are viewing this thread

    Forum statistics

    Threads
    275,522
    Messages
    7,285,005
    Members
    33,473
    Latest member
    Sarca

    Latest threads

    Top Bottom