Hello bigmancrisler,
I will PM you about the CFE223 and the BLC2
best regards,
Mondial
The Barter Thread
- Thread starter Squaregrouper
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
I will PM you about the CFE223 and the BLC2
best regards,
Mondial
I have a large amount of cleaned and uncleaned 45 acp brass (mixed large and small primer) that I am unlikely to use.
Looking to trade for 300 blk brass, 10 mm brass and/or bullets.
Also have 30-06 brass available for trade or can sell for a reasonable offer.
Looking to trade for 300 blk brass, 10 mm brass and/or bullets.
Also have 30-06 brass available for trade or can sell for a reasonable offer.
guzma393
Active Member
I have:
- 8 lb jug 2400 (opened to try out, but 98% full.
- 1 lb power pistol
- 1 lb ramshot zip
- partial 1lb jugs of cfe pistol, h4198, rl7, rl15
- 400+ 105 swc cast and powder coated bullets, sized to .358".
- 500 ct. Xtreme .312/123 grain plated bullets.
Looking for:
- 223 (like h335 or suitable for 55 grain bullets) powder
- fffg black powder
- ffffg black powder
- .490" round balls.
- .490 round ball mold
- Cash is king
- 8 lb jug 2400 (opened to try out, but 98% full.
- 1 lb power pistol
- 1 lb ramshot zip
- partial 1lb jugs of cfe pistol, h4198, rl7, rl15
- 400+ 105 swc cast and powder coated bullets, sized to .358".
- 500 ct. Xtreme .312/123 grain plated bullets.
Looking for:
- 223 (like h335 or suitable for 55 grain bullets) powder
- fffg black powder
- ffffg black powder
- .490" round balls.
- .490 round ball mold
- Cash is king
Last edited:
Esox
Member
- May 16, 2015
- 50
I have 8lbs of HP-38 and large pistol primers.
Looking for Titegroup, small pistol primers and small rifle primers.
Looking for Titegroup, small pistol primers and small rifle primers.
Where are you located?
Esox
Member
- May 16, 2015
- 50
Rockville
kstone803
Official Meat Getter
Looking for ramshot Magnum powder or Reloder 22. also in need of large rifle magnum primers, only need 100. Have all sorts of stuff to trade.
85MikeTPI
Ultimate Member
I have a jug from above post #1558
The Barter Thread
I have 3,000 (All Same Lot) Barnes Match Burners 6mm 112grn would trade for Berger 109 LRHT's.
Have 10-15K MLRP of various brands
Feel free to shoot me a PM with trades if interested.
floatingboy
Active Member
I HAVE:
Various 25 cal projectiles:
Speer Hot-Cor 120gr 200ct
Speer BTSP 120gr 80ct
Hornady 120 gr Spire H.P. (#2560) 162 ct
Nosler Ballistic Tip 115gr 50ct
Nosler Partition 120gr 150ct
Nosler Partition 115gr 49ct
Hornady Interbond 110gr 90ct
Hornady SST 117gr 110ct
6.5mm projectiles:
PPU 139gr FMJ 300 ct
30 cal projectiles:
Nosler Partition 200gr 150ct
Nosler Partition 180gr Moly Coated 50ct
338 cal projectiles:
Nosler Parition 250gr Moly Coated 50ct
Dies:
-257 Weatherby Hornady Custom Grade Set (FL Sizer, Seater)
-257 Weatherby Redding Custom Competition Set (S-type bushing die, Micrometer seater)
-308 Win Redding Body Die
-7mm Rem Mag Lee Ultimate Set
Powders:
-IMR 7828 (Dupont) - 3 1-lb cans
-Leverevolution - 2 1-lb cans
-MagPro 1 lb
Brass (fired):
-257 Wby, mixed Norma & Wby stamped, 89 ct
-257 Wby, PPU, formed from 7mm Rem Mag, 49ct
I WANT:
-30-06 brass, Lapua only
-6.5x55 brass, Lapua only
-30 cal Sierra Match King, 175 gr
-30 cal Sierra Match King, 168 gr
-30 cal Nosler Custom Competition, 168 gr
-IMR 4350
-Win Sta-ball (6.5 or Match)
-H4350
-6.5x55 Micrometer seater (Redding, Forster, etc)
-45 cal (.458-.459) mould - 500+ gr Postell, Creedmoor, Money
Various 25 cal projectiles:
Speer Hot-Cor 120gr 200ct
Speer BTSP 120gr 80ct
Hornady 120 gr Spire H.P. (#2560) 162 ct
Nosler Ballistic Tip 115gr 50ct
Nosler Partition 120gr 150ct
Nosler Partition 115gr 49ct
Hornady Interbond 110gr 90ct
Hornady SST 117gr 110ct
6.5mm projectiles:
PPU 139gr FMJ 300 ct
30 cal projectiles:
Nosler Partition 200gr 150ct
Nosler Partition 180gr Moly Coated 50ct
338 cal projectiles:
Nosler Parition 250gr Moly Coated 50ct
Dies:
-257 Weatherby Hornady Custom Grade Set (FL Sizer, Seater)
-257 Weatherby Redding Custom Competition Set (S-type bushing die, Micrometer seater)
-308 Win Redding Body Die
-7mm Rem Mag Lee Ultimate Set
Powders:
-IMR 7828 (Dupont) - 3 1-lb cans
-Leverevolution - 2 1-lb cans
-MagPro 1 lb
Brass (fired):
-257 Wby, mixed Norma & Wby stamped, 89 ct
-257 Wby, PPU, formed from 7mm Rem Mag, 49ct
I WANT:
-30-06 brass, Lapua only
-6.5x55 brass, Lapua only
-30 cal Sierra Match King, 175 gr
-30 cal Sierra Match King, 168 gr
-30 cal Nosler Custom Competition, 168 gr
-IMR 4350
-Win Sta-ball (6.5 or Match)
-H4350
-6.5x55 Micrometer seater (Redding, Forster, etc)
-45 cal (.458-.459) mould - 500+ gr Postell, Creedmoor, Money
gungate
NRA Patron Member
Can you use Ramshot Enforcer?
kstone803
Official Meat Getter
No, this is for magnum rifle, not pistol.
85MikeTPI
Ultimate Member
I have a case (5000) of new (2023) Fed 210 LRP I’m looking to trade for CCI 34 or CCI 200 LRP 1:1 in bricks of 1000
Squaregrouper
Kragaphile
I will do that trade provided you can work around my travels from Pikesville to HarCo.
What are your .357 Sig ammo makes/models?
If you want 9mm brass, I have a LOT of it for reloading.
Squaregrouper
Kragaphile
I have 1100+ pieces of Win .38sp in factory boxes. Many of the boxes don't have bar codes, so they're pretty old.
.38 Super dies, combo of Dillon and Redding.
.
Want 6.5 Grendel brass, 10mm brass, Power Pistol powder and AR Comp powder.
.38 Super dies, combo of Dillon and Redding.
.
Want 6.5 Grendel brass, 10mm brass, Power Pistol powder and AR Comp powder.
Speedluvn
Active Member
Due to a miscommunication, I have 5 boxes (100 rounds each box) of some 20 gauge, 7/8 ounce load, Federal light game load. I don’t own a 20 gauge shotgun! They were purchased from the Walmart in Towson that’s closing.
I would prefer a trade of something in 12 gauge.
The purchased rounds were to be used for hunting because my press is set-up to load 1ounce rounds. One ounce rounds don’t reliably cycle my semi auto field guns.
Whatcha got?
I would prefer a trade of something in 12 gauge.
The purchased rounds were to be used for hunting because my press is set-up to load 1ounce rounds. One ounce rounds don’t reliably cycle my semi auto field guns.
Whatcha got?
Speedluvn
Active Member
Wish I had looked at this site before I came back east to the Eastern Shore to get a couple of my guns and stuff. Only thing I've been finding here is pistol and shotgun stuff for reloading...I live in rifle country. At least I traded one of my Spolar reloading machines and a Dillon 550 while I was there. Lot of good stuff listed here
85MikeTPI
Ultimate Member
Ramshot Magnum has been traded..
Speedluvn
Active Member
Deal was made and I no longer have the rounds.
Users who are viewing this thread
Forum statistics
Latest threads
-
-
-
-
-
Holosun DRS-NV (Digital Rifle Sight-Night Vision) In Stock (3 Viewers)- Started by MDElite
- Replies: 1
-
-
MD DNR Outdoor Recreation Survey -- Outdoorsman Responses Needed (1 Viewer)
- Started by Derwood
- Replies: 5