Useful, thanks for posting. Just a few words of caution, though, several of their repro rifle cases are made from MagTech shotgun brass, rather than solid drawn rifle brass. That creates at least two significant issues:
The rims on MagTech brass are thinner than most drawn rifle cases, so if your rifle headspaces on the rim, excessive headspace may result. This is fixable with shim washers for the cases made out of brass sheet stock.
MagTech cases are balloon head, not solid, so watch your maximum pressures. I would strongly recommend against using these with nitro-for-black loads for larger base, bottlenecked cartridges like 577/450.