Cleaning a press

Yoshi · Oct 18, 2018

Have an older RCBS that needs cleaning. Any suggestions on what to use to clean and then what to re-lubricate with?

Uncle Duke · Oct 18, 2018

I've just wiped mine down over the years, and then used a bit of oil on the ram and the pivot points.

Red1917 · Oct 18, 2018

Same, I bought mine used and wiped it down and hit the moving parts with a little Remoil, works fine

K31 · Oct 18, 2018

Gun solvent if there is stubborn build up, then Ezzox. Just Ezzox if not.

Major03 · Oct 18, 2018

Mobile 1 on pivot points and Ezzox on any non painted parts. Also, clean your dies and apply a very light coat of Exxoz to them when you're done.