Weber
USMC
Here is a repost since the last thread was spammed and deleted.
Reserved for parts list, cost, links & other info.
Carbon Steel tube, Alum ends, direct thread on
Tax stamp, $200 required.
Break to can adapter (thread protector D-Cell), $19.99 Required. http://sdtacticalarms-com.3dcartstores.com/D-cell-Maglite-Rear-Thread-Protector-non-anodized-and-anodized_p_15.html
8.375" Steel tube D-Cell, $30.99 required if not using a donor flashlight for a tube. http://sdtacticalarms-com.3dcartstores.com/SOLVENT-TRAP-TUBES_p_47.html
SS D-Cell Spacer and blast tube, $10.00 required. http://sdtacticalarms-com.3dcartstores.com/Stainless-D-Aluminum-C-and-D-PVC-Pipe_p_41.html
Freeze Plugs 381-3179, $11 for a 12 pack at Napa required. http://www.napaonline.com/Catalog/C...lug-1-350-34-300-mm/_/R-SEP3813179_0186397517
End Cap, $19.99 Aluminum D Cell. http://sdtacticalarms-com.3dcartstores.com/End-Caps_p_50.html
Total Estimated total for Steel tube with Aluminum ends, direct thread on build parts: $92.96 + Tax stamp $200 = $292.96 Total
Carbon Steel Parts list
Tax stamp, $200 required.
Muzzle Break, $56.99 not required. You can use an adapter that threads directly to the barrel. http://sdtacticalarms-com.3dcartstores.com/SDTA-Muzzle-Break_p_65.html
Break to can adapter (thread protector D-Cell), $34.99 Required. http://sdtacticalarms-com.3dcartstores.com/Carbon-steel-Rear-thread-protector-D-cell_p_70.html
8.375" Steel tube D-Cell, $30.99 required if not using a donor flashlight for a tube. http://sdtacticalarms-com.3dcartstores.com/SOLVENT-TRAP-TUBES_p_47.html
SS D-Cell Spacer and blast tube, $10.00 required. http://sdtacticalarms-com.3dcartstores.com/Stainless-D-Aluminum-C-and-D-PVC-Pipe_p_41.html
Freeze Plugs 381-3179, $11 for a 12 pack at Napa required. http://www.napaonline.com/Catalog/C...lug-1-350-34-300-mm/_/R-SEP3813179_0186397517
End Cap, $34.99 Carbon Steel D Cell. http://sdtacticalarms-com.3dcartstores.com/End-Caps_p_50.html
Total Estimated total for Steel build parts: $178.96 + Tax stamp $200 = $378.96 Total
Titanium build
Tax stamp, $200 required.
Muzzle Break, $56.99 not required. You can use an adapter that threads directly to the barrel. http://sdtacticalarms-com.3dcartstores.com/SDTA-Muzzle-Break_p_65.html
Break to can adapter (thread protector D-Cell), $19.99 Required add the option to the break selection. http://sdtacticalarms-com.3dcartstores.com/SDTA-Muzzle-Break_p_65.html
8" Titanium tube D-Cell, $69.99 required if not using a donor flashlight for a tube. http://sdtacticalarms-com.3dcartstores.com/SOLVENT-TRAP-TUBES_p_47.html
SS D-Cell Spacer and blast tube, $10.00 required. http://sdtacticalarms-com.3dcartstores.com/Stainless-D-Aluminum-C-and-D-PVC-Pipe_p_41.html
Freeze Plugs 381-3179, $11 for a 12 pack at Napa required.
End Cap, $19.99 Aluminium D Cell. http://sdtacticalarms-com.3dcartstores.com/End-Caps_p_50.html
Total Estimated total for Titanium Build parts: $187.96 + Tax stamp $200 = $397.96 Total
Purchased tools
Depending on the style you want to do, there are different methods. The most basic method is not angling the baffles at all. You just use the centering tool and a drill to drill the middle to the desired caliber. I will be testing non angle baffles, 45 deg angled baffles and 60 degree baffles. I may test different combinations of the baffles as well, along with different spacing arrangements.
Center Tool $19.99, required. http://sdtacticalarms-com.3dcartstores.com/Centering-Tools_c_17.html
Puller tip 45 degree, required if adding an angle to baffles. If you don't have a puller to use the tip off of, there are replacement tips online for $10-$15.
60 Degree tip, required if wanting this angle on your baffles. It is recommend you start with 45 then use the 60 to prevent distorting the baffle. $11.83 http://www.amazon.com/dp/B00012YFKI/ref=sr_ph?ie=UTF8&qid=1416935804&sr=1&keywords=grizzly+mt2
Puller tip that is close to 60 degrees. just another example of something you can use. $6.07. http://www.toolup.com/proto_j4012t_puller-tip-detachable-sta.aspx
And then there is a complete setup, it forms perfect consistent baffles over and over again, and gives you a perfectly centered bore. The price is perfect and well worth the investment.
http://www.jstactical.com/JForm-D-SS-Complete_p_15.html
Baffles:
There are two brands of baffles that I have found will fit.
This is the one I linked to above.
This part number is stronger and slightly longer in the depth. They also fit tighter in the tube, and require just a slight bit of pressure to push down the tube. These may create a better seal, but either will work just fine.
Reserved for parts list, cost, links & other info.
Carbon Steel tube, Alum ends, direct thread on
Tax stamp, $200 required.
Break to can adapter (thread protector D-Cell), $19.99 Required. http://sdtacticalarms-com.3dcartstores.com/D-cell-Maglite-Rear-Thread-Protector-non-anodized-and-anodized_p_15.html
8.375" Steel tube D-Cell, $30.99 required if not using a donor flashlight for a tube. http://sdtacticalarms-com.3dcartstores.com/SOLVENT-TRAP-TUBES_p_47.html
SS D-Cell Spacer and blast tube, $10.00 required. http://sdtacticalarms-com.3dcartstores.com/Stainless-D-Aluminum-C-and-D-PVC-Pipe_p_41.html
Freeze Plugs 381-3179, $11 for a 12 pack at Napa required. http://www.napaonline.com/Catalog/C...lug-1-350-34-300-mm/_/R-SEP3813179_0186397517
End Cap, $19.99 Aluminum D Cell. http://sdtacticalarms-com.3dcartstores.com/End-Caps_p_50.html
Total Estimated total for Steel tube with Aluminum ends, direct thread on build parts: $92.96 + Tax stamp $200 = $292.96 Total
Carbon Steel Parts list
Tax stamp, $200 required.
Muzzle Break, $56.99 not required. You can use an adapter that threads directly to the barrel. http://sdtacticalarms-com.3dcartstores.com/SDTA-Muzzle-Break_p_65.html
Break to can adapter (thread protector D-Cell), $34.99 Required. http://sdtacticalarms-com.3dcartstores.com/Carbon-steel-Rear-thread-protector-D-cell_p_70.html
8.375" Steel tube D-Cell, $30.99 required if not using a donor flashlight for a tube. http://sdtacticalarms-com.3dcartstores.com/SOLVENT-TRAP-TUBES_p_47.html
SS D-Cell Spacer and blast tube, $10.00 required. http://sdtacticalarms-com.3dcartstores.com/Stainless-D-Aluminum-C-and-D-PVC-Pipe_p_41.html
Freeze Plugs 381-3179, $11 for a 12 pack at Napa required. http://www.napaonline.com/Catalog/C...lug-1-350-34-300-mm/_/R-SEP3813179_0186397517
End Cap, $34.99 Carbon Steel D Cell. http://sdtacticalarms-com.3dcartstores.com/End-Caps_p_50.html
Total Estimated total for Steel build parts: $178.96 + Tax stamp $200 = $378.96 Total
Titanium build
Tax stamp, $200 required.
Muzzle Break, $56.99 not required. You can use an adapter that threads directly to the barrel. http://sdtacticalarms-com.3dcartstores.com/SDTA-Muzzle-Break_p_65.html
Break to can adapter (thread protector D-Cell), $19.99 Required add the option to the break selection. http://sdtacticalarms-com.3dcartstores.com/SDTA-Muzzle-Break_p_65.html
8" Titanium tube D-Cell, $69.99 required if not using a donor flashlight for a tube. http://sdtacticalarms-com.3dcartstores.com/SOLVENT-TRAP-TUBES_p_47.html
SS D-Cell Spacer and blast tube, $10.00 required. http://sdtacticalarms-com.3dcartstores.com/Stainless-D-Aluminum-C-and-D-PVC-Pipe_p_41.html
Freeze Plugs 381-3179, $11 for a 12 pack at Napa required.
End Cap, $19.99 Aluminium D Cell. http://sdtacticalarms-com.3dcartstores.com/End-Caps_p_50.html
Total Estimated total for Titanium Build parts: $187.96 + Tax stamp $200 = $397.96 Total
Purchased tools
Depending on the style you want to do, there are different methods. The most basic method is not angling the baffles at all. You just use the centering tool and a drill to drill the middle to the desired caliber. I will be testing non angle baffles, 45 deg angled baffles and 60 degree baffles. I may test different combinations of the baffles as well, along with different spacing arrangements.
Center Tool $19.99, required. http://sdtacticalarms-com.3dcartstores.com/Centering-Tools_c_17.html
Puller tip 45 degree, required if adding an angle to baffles. If you don't have a puller to use the tip off of, there are replacement tips online for $10-$15.
60 Degree tip, required if wanting this angle on your baffles. It is recommend you start with 45 then use the 60 to prevent distorting the baffle. $11.83 http://www.amazon.com/dp/B00012YFKI/ref=sr_ph?ie=UTF8&qid=1416935804&sr=1&keywords=grizzly+mt2
Puller tip that is close to 60 degrees. just another example of something you can use. $6.07. http://www.toolup.com/proto_j4012t_puller-tip-detachable-sta.aspx
And then there is a complete setup, it forms perfect consistent baffles over and over again, and gives you a perfectly centered bore. The price is perfect and well worth the investment.
http://www.jstactical.com/JForm-D-SS-Complete_p_15.html
Baffles:
There are two brands of baffles that I have found will fit.
This is the one I linked to above.
This part number is stronger and slightly longer in the depth. They also fit tighter in the tube, and require just a slight bit of pressure to push down the tube. These may create a better seal, but either will work just fine.
Last edited: