I've got a Cara Cara that had one of the screws fall out and a Gerber tanto that I've had for at least 10 years (how I managed not to lose it is beyond me) that had both the screws holding the clip come out. I've done a bunch of google and duck duck go searches and can't seem to find any answers, it's all about bending the clip back in place, not about replacing stripped screws. Just looking for lessons learned.
Is there a good source for generic screws sets so I can repair these and is it best to get a slightly larger screw since it seems the holes they go into is probably stripped and/or is there a best method to refill or retap the hole with out something like crazy glue gumming up the action of the knife. Any help or advice is appreciate......
Is there a good source for generic screws sets so I can repair these and is it best to get a slightly larger screw since it seems the holes they go into is probably stripped and/or is there a best method to refill or retap the hole with out something like crazy glue gumming up the action of the knife. Any help or advice is appreciate......