How'd they perform?
Good , I just couldnt get the powder to drop a constant charge so i went to Lil Gun
Are you using a Dillon press? I have heard H110 and other flake powders don't measure well. I find the 1680 and Lil' Gun to be pretty consistent.
Flake and ball powders meter extremely well on a Dillon. Extruded powders are the ones that don't meter worth a damn in a Dillon.Are you using a Dillon press? I have heard H110 and other flake powders don't measure well. I find the 1680 and Lil' Gun to be pretty consistent.
I don't think they meter well from anything. My chargemaster does OK with the addition of a McDonalds straw.
Sent from my DROID RAZR HD using Tapatalk
I don't think they meter well from anything. My chargemaster does OK with the addition of a McDonalds straw.
Sent from my DROID RAZR HD using Tapatalk
If you want to do some mass production for 300BLK, 223, or 308, I'm just up the road and you are welcome to use the 550.No I haven't. I'm not sure how to do that. Since for now, I'm stick with a single stage press, while I'm pushing a bullet into one case, my next charge is trickling. Doing it that way cuts down on the wait. I am always looking to improve my efficiency though.
Sent from my DROID RAZR HD using Tapatalk
The door is always open, as long as it isn't deer season.Thanks my friend. Once I get my 300 built and develope some rounds, you know I'm gonna take you up on that.
Sent from my DROID RAZR HD using Tapatalk
Starting to load up some Speer 125 gr TNT HP using H110. Starting out with 16.5gr up to 18gr. What should COAL be?
Starting to load up some Speer 125 gr TNT HP using H110. Starting out with 16.5gr up to 18gr. What should COAL be?
anyone have loads for pistol length barrels? 8.5-10.5?
I use zip for my pistol loads, and it seems like it should work for the 300 blk but hard to find much info online. wondering if it might be time to pick up a copy of quickload software
anyone have loads for pistol length barrels? 8.5-10.5?
I use zip for my pistol loads, and it seems like it should work for the 300 blk but hard to find much info online. wondering if it might be time to pick up a copy of quickload software
All these are with an 8.5 inch barrel and shooting Berry's plated 220 grain bullets. Just pulled them from my chrono app data. I'm going to try to get a consistent 980 or at least try for that.
11.6gr 1680 - 900 fps avg
11.0 CFE BLK - 905 fps avg
11.4 CFE BLK - 917 fps avg