HVAC estimates needed in St Marys

Ngrovcam · Mar 23, 2021

Hey, folks.
Still recovering from our house fire and are
at the point of needing estimates on a two
zone A/C system with two mini-splits.
We know Winters Heating and Cooling
up there in Leonardtown, has a very solid reputation.
Wanted to get one or two more estimates.
Any ideas?
Thanks!

Michigander08 · Mar 23, 2021

Ngrovcam said:
Hey, folks.
Still recovering from our house fire and are
at the point of needing estimates on a two
zone A/C system with two mini-splits.
We know Winters Heating and Cooling
up there in Leonardtown, has a very solid reputation.
Wanted to get one or two more estimates.
Any ideas?
Thanks!

I have this company worked on my HVAC before. They are honest. Not sure if they are far from you (Upper Marlboro).

https://www.belairengineering.com/

Beancounter · Mar 23, 2021

Ngrovcam said:
Hey, folks.
Still recovering from our house fire and are
at the point of needing estimates on a two
zone A/C system with two mini-splits.
We know Winters Heating and Cooling
up there in Leonardtown, has a very solid reputation.
Wanted to get one or two more estimates.
Any ideas?
Thanks!

You don't want an estimate. You want a quote. Great Mills Heating and Air.

gwchem · Mar 23, 2021

Hancock. Mark is a good guy with good prices. He also owns Accurate Guns in leonardtown.

Inigoes · Mar 23, 2021

gwchem said:
Hancock. Mark is a good guy with good prices. He also owns Accurate Guns in leonardtown.

^ This

+1 for Mark Hancock

While you are installing new, install UVC air sanitizers also.

Ngrovcam · Mar 23, 2021

Michigander08 said:
I have this company worked on my HVAC before. They are honest. Not sure if they are far from you (Upper Marlboro).

https://www.belairengineering.com/

We are down at the south end of PAX, in Lexington Park. It is a bit of a stretch...but,
hey, honesty is worth it. Thanks.

Ngrovcam · Mar 23, 2021

Beancounter said:
You don't want an estimate. You want a quote. Great Mills Heating and Air.

Ignorant as I am, I didn’t know there’s a difference...but, now that I see it in writing, I get it! Thanks.

135sohc · Mar 23, 2021

FWIW from personal experiences I would not use T-N Bowes. For awhile they were the company we used at work for the building I work in.

Always something wrong and they sure liked to come in and milk that cow for all they could because they knew it was easy $$$ to keep 'fixing' it. Every 3-4 months they were in there for something...

The last time the heat pump 'died' they finally wised up to the BS and called Great Mills HVAC. Kirk and crew were out there in an hour and diagnosed the problem in 5 minutes. Undersized feed and a faulty contactor (both done by T-N-B) and 2 years later it has not failed since then.

Johnconlee · Mar 23, 2021

Hancock's in Loveville, MD, Mark and Bobby are good people. I have also heard 2 positive experiences from close friends on TN Bowes, both complete new system installations in the past few years. They both claim best price and good support after the job.

Ngrovcam · Mar 23, 2021

Thanks, all!!!
Great leads.
This has been a grueling process...

hobiecat590 · Mar 24, 2021

Pax Heating and Air are great and very competitive. I believe that their high SEAR Amana unit has a lifetime warranty on the compressor. Good luck.

empty5853 · Apr 3, 2021

Inigoes said:
^ This

+1 for Mark Hancock

While you are installing new, install UVC air sanitizers also.

Another one for Hancock HVAC. I’ve used them for my annual PM for the last 10 years. I also had them do a complete HVAC replacement on my previous house about 20 years ago. Great job. That’s why I stayed with them on my current house PM.
Both Mark and his brother Bill are good people.

Vr
Mark T.

Mightydog · Apr 3, 2021

Ngrovcam said:
Hey, folks.
Still recovering from our house fire and are
at the point of needing estimates on a two
zone A/C system with two mini-splits.
We know Winters Heating and Cooling
up there in Leonardtown, has a very solid reputation.
Wanted to get one or two more estimates.
Any ideas?
Thanks!

What brand are you looking at? We’ve had a Lennox Elite heat pump system that was installed in 2000. Looking at Lennox, Trane and Daiken.

Ngrovcam · Apr 5, 2021

MightyDog, thanks for asking...we had
Tranes at our Port Tobacco house, and
were pleased. But, that was 15+ years
ago.
Am hearing Goodman is now a good bet
at 18 seer, which seems to be the size
we’re looking at in our rebuild.

kstone803 · Apr 5, 2021

Simmons in Hollywood or King George Mechanical if you want a Trane.

Ravitch · Apr 5, 2021

Ngrovcam said:
Ignorant as I am, I didn’t know there’s a difference...but, now that I see it in writing, I get it! Thanks.

You and me both, somehow I made it to my forties without realizing there is a difference. That knowledge will come in handy shortly, as somehow my builders grade heat pump that was installed in 1997 is still ticking but an absolute energy hog.

Ngrovcam · Apr 5, 2021

Ravitch said:
You and me both, somehow I made it to my forties without realizing there is a difference. That knowledge will come in handy shortly, as somehow my builders grade heat pump that was installed in 1997 is still ticking but an absolute energy hog.

The benefit of the Forum at its best...
sharing knowledge and resources within the community...a virtual “best friend” no
further away than the keyboard. Not that
we are always “friends”... but, post
something about the loss of a loved one,
and especially of a beloved dog, and we
are all right there.

HVAC estimates needed in St Marys

The #1 community for Gun Owners of the Northeast

Member Benefits:

Ultimate Member

ridiculous and psychotic

Active Member

Ultimate Member

Head'n for the hills

Ultimate Member

Ultimate Member

Ultimate Member

Ultimate Member

Ultimate Member

Ultimate Member

Active Member

Ultimate Member

Ultimate Member

Official Meat Getter

Member

Ultimate Member

Users who are viewing this thread

Log in

Forum statistics