TGR
Active Member
Just getting around to posting these 2 Husqvarna 43’s I finished last fall. Both in 9.3x57. One from 1937 and the second from 1939. Both had great blueing, rough bores that cleaned up nicely, and average stocks. I sent the bolts out to a guy in Texas for forging and polishing. The receivers were drilled and tapped locally by Badger Gun Works and I put in 2-7 Leupolds. I shortened the barrel on the one that had the kill tacs to make a nice little brush gun. Happily added a tac to it last season after opening day. Both shoot 1”-1.5” at 100.
Attachments
Last edited:
