Did you get i locally? If so where?
Franklin Armory Binary Trigger
- Thread starter pwoolford
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
Did you get i locally? If so where?
md_al
Active Member
I would like one for the KelTec S2K but it would be $800.00 (MSRP of $249.00) and they only make 6 per month . j/k
Really looking forward to the HK version.
Video teaser...
https://www.youtube.com/watch?v=4dc...429633685&mc_cid=799316409d&mc_eid=c5557af1d7
.,
Video teaser...
https://www.youtube.com/watch?v=4dc...429633685&mc_cid=799316409d&mc_eid=c5557af1d7
.,
I was just getting ready to post this lol. Can't wait !!
Jasonshooter
Active Member
These bad boys rock !!! I was hesitant to put the $$ out for it ,, but dam !! I was so impressed I had to order a second one , the only downside to this set up is that your ammo stash quickly disappears ☹️
PowPow
Where's the beef?
If the HK version will roll in a PTR-32, I might be interested.
It will work on both the ptr32 and 91.if it works on the hk platform.
PowPow
Where's the beef?
I've already put HK-compatible on it before, so I have no reason to think otherwise.
md_al
Active Member
Re: update on my trigger failing function check, I reinstalled it today. I mailed it to Franklin Armory and the Armorer findings were that the IDS was out of spec and there were burrs in the hammer. IDS was replaced as well as the hammer. Tested at their end then mailed back. Passed function check. 
Hopefully next week I will try it (mounted on a PSA AR9 pistol). The one I bought from GymRatz is on an AR pistol which I use a CMMG conversion bolt. Cheap fun.
Hopefully next week I will try it (mounted on a PSA AR9 pistol). The one I bought from GymRatz is on an AR pistol which I use a CMMG conversion bolt. Cheap fun.
From the Franklin web site...
https://www.franklinarmory.com/pages/bfsiii-for-hk-preorder-count-down
We will start taking pre-orders for the BFSIII™ for HK at the start of the NRA show Apr 28, 2017 8:00am (PT). You will be able to order online or at the NRA show in person.
The BFSIII™ for HK is a 3-Position Trigger. In position 3 it will fire 1 round on Pull and 1 round on Release. This makes it the fastest semi-automatic trigger on the market. The BFSIII™ is ideal for Tactical and Competition use. The BFSIII™ provides greatly reduced split times between rounds and the ability to place two separate shots into a tighter group.
* A trigger pull around 4.5 pounds.
* Ambidextrous Safety Selector.
* Safety Selector will fit in two and three position trigger housings.
* Will not work with Ambiidextrous Housings
* Trigger housing, ejector, ejector pin and ejector spring are not included.
* Will fit most HK 91, 93, & MP5 variants and clones
* Some firearms may require additional fitting
* MSRP $699.99
https://www.franklinarmory.com/pages/bfsiii-for-hk-preorder-count-down
We will start taking pre-orders for the BFSIII™ for HK at the start of the NRA show Apr 28, 2017 8:00am (PT). You will be able to order online or at the NRA show in person.
The BFSIII™ for HK is a 3-Position Trigger. In position 3 it will fire 1 round on Pull and 1 round on Release. This makes it the fastest semi-automatic trigger on the market. The BFSIII™ is ideal for Tactical and Competition use. The BFSIII™ provides greatly reduced split times between rounds and the ability to place two separate shots into a tighter group.
* A trigger pull around 4.5 pounds.
* Ambidextrous Safety Selector.
* Safety Selector will fit in two and three position trigger housings.
* Will not work with Ambiidextrous Housings
* Trigger housing, ejector, ejector pin and ejector spring are not included.
* Will fit most HK 91, 93, & MP5 variants and clones
* Some firearms may require additional fitting
* MSRP $699.99
Attachments
md_al
Active Member
I hope GymRatz gets stock of that soon
Great news !!!!can't wait! !
I just ordered some spare parts so I don't have to cannibalize my trigger pack. Ejector, spring, and pin.
.,
Davesettimi
Just A Member
I recently installed one in my Colt and i love it! Really easy install and lots of fun to operate. I highly recommend the BFS3 if your in the market for a Binary trigger.
PowPow
Where's the beef?
Pricey, but I gots to have one!
Thanks for the advice! I have 2 that would not pass the function test. I swapped out the hammer and it works fine. Now to get to the range.....
Users who are viewing this thread
Forum statistics
Latest threads
-
-
-
-
-
-
MD DNR Outdoor Recreation Survey -- Outdoorsman Responses Needed (2 Viewers)
- Started by Derwood
- Replies: 5
-
