The Official AR-15 Picture Thread

OSOK1776 · Sep 23, 2017

My recently assembled AR15

Umbrella Corp lower
18" Barrel 1/7 twist
Midwest Industries 15" Handguard
Vortex Strike Eagle 1-8 Optic
Luth AR MBA1 Stock
Magpul BUIS

Waiting on the triggertech trigger to arrive

falconguy · Sep 23, 2017

Nice pieces! Here's my Bushmaster with a Vietnam era M16 bayonet.

AlBeight · Sep 23, 2017

KrisM said:
My recently assembled AR15

Umbrella Corp lower
18" Barrel 1/7 twist
Midwest Industries 15" Handguard
Vortex Strike Eagle 1-8 Optic
Luth AR MBA1 Stock
Magpul BUIS

Waiting on the triggertech trigger to arrive

Beautiful. Like the stainless bbl too.

Can also ask a question though? I see tons of folks with BUIS pinned under a scope. How useful is that? Do you have a QD scope mount? I get it for a SHTF gun, to pull out a multi-tool in an emergency and remove the scope/mount if damaged or malfunctioning to keep you operational. I have that same setup on 2 of my rigs, and will probably remove them or change to 45deg offset sights. I'm only now questioning the practicality of $100 worth of un-useable sights, I've done it myself and now I'm wondering why.

OSOK1776 · Sep 23, 2017

AlBeight said:
Beautiful. Like the stainless bbl too.

Can also ask a question though? I see tons of folks with BUIS pinned under a scope. How useful is that? Do you have a QD scope mount? I get it for a SHTF gun, to pull out a multi-tool in an emergency and remove the scope/mount if damaged or malfunctioning to keep you operational. I have that same setup on 2 of my rigs, and will probably remove them or change to 45deg offset sights. I'm only now questioning the practicality of $100 worth of un-useable sights, I've done it myself and now I'm wondering why.

I do not have QD on that particular scope mount, however I do have an allen wrench that fits the scope mount inside of the pistol grip.

babalou · Sep 26, 2017

.22 Nosler

ok, these are not great pics. Real sunny at Chad's 9/23 build class.

- Stoner .22 Nosler 18" stainless steel fluted barrel 1:8 twist complete upper with M-Lok hand guard
- Luth-AR MB3 stock
-Tubbs buffer spring
- Colt gold ejector spring I won on MDS
- Athlon 8-34x56 BTR MOA 30mm scope
- Joe Bob Outfitters Molon Labe Spartan lower with Spikes enhanced lower parts kit
- Geissele SSA-E trigger
- Harris Bipod- not in pic. I need the M-Lok adapter
- four 6.8 SPC Mags.
- Vortex cantilever 30mm scope mount

babalou · Sep 26, 2017

one more with the stock

damn sun..

INMY01TA · Oct 9, 2017

Just finished my 1st pistol build..

dreadpirate · Oct 10, 2017

INMY01TA said:
Just finished my 1st pistol build..

I like it! What's the muzzle device?

INMY01TA · Oct 14, 2017

dreadpirate said:
I like it! What's the muzzle device?

Thanks. This is the Indian Creek blast forwarding device. It is threaded and screws on and off for use with multiple firearms if desired.

bigjoegood1 · Oct 15, 2017

First pistol build almost done.

Sent from my SM-G955U using Tapatalk

alucard0822 · Oct 26, 2017

Just finished up a new PCC build, so far ran a few mags through it without issue, will see how it does in the next match. have a 16" 9mm forward-side charging FM products upper, QC10 Glock mag lower, 6.5oz buffer, BAD short throw selector, magpul furniture, the new Calvin Elite trigger, and topped it with an XPS2-0, came in at 7.5lbs with opic, without mag. Recoil is like a BB gun, and this trigger is AWESOME, smokes the hyperfire 24C and AR gold for shooting fast, the pull is stupid light at 24oz out of the box, but 0 creep short crisp break, and short really positive reset give it a good feel. With every match sanctioning body adding PCC divisions, it should be a lot of fun to run it.

bkuether · Oct 27, 2017

Finally finished my XM 177 (ish) build.

Big thanks to SCSG, who's lower I used, and who helped me assemble the upper.

The parts are.... a mishmash. Del Ton stopped doing A2 uppers, so I had to find my own.

Here is the breakdown:

-Lower (SCSG)
-Lower Parts (CMMG)
-Lower buffer tube, stock and hand grip (Del-Ton)
-Upper (RRA A2)
-Upper parts and Barrel Assembly (Del-Ton)
-BCG (PSA)
-Charging handle (BCM gf 4)

The upper and lower are TIGHT. NO movement what so ever.

Here are the pics.... Taking it out right now to test it!

2112rws · Oct 27, 2017

Looks great. What type upper and what length?

fred333 · Oct 27, 2017

bkuether said:
Finally finished my XM 177 (ish) build.

I'd've gone with black plastics, but, otherwise, I hope she shoots as good as she looks. Keep us posted please. :thumbsup:

bkuether · Oct 28, 2017

fred333 said:
I'd've gone with black plastics, but, otherwise, I hope she shoots as good as she looks. Keep us posted please.

I have wanted the green for a while. While not 100 % period accurate, I am left handed so a shell deflector was a must. I have an older period grip, but its black and this gun is green.

Shot it today, nice recoil impulse. The heavy buffer probably plays into that....

This is a 10.5 barrel with a 5.5 flash hider pinned and welded on the end.

I really like it, now just need to get it set for 50 yard zero. May get to play with it more this weekend. Depends on how much rain we get.

bkuether · Oct 28, 2017

2112rws said:
Looks great. What type upper and what length?

The upper is a RRA (assume Rock River Arms), with a Del Ton HBAR barrel.

10.5 with a 5.5 flash hider pinned and welded.

retafshooter · Oct 28, 2017

My new "Modern Hunting Rifle" 6.8spc

TKDefense 6.8spc Specs:

Bison Armory 18” SS Barrel exterior cherakote
Bison Armory Headspaced Bolt
Nickel Boron Bolt Carrier
Aero Precision Lower
Aero Precision Upper/Rail Sail
Geissele SSA-E Precision 3.5 lb Trigger
GL Shock Buttstock
VG6 Flash Hider/Compensator

Added: Nikon ProStaff 4-12x Scope

First Range session Target photo at 100 yards.

zhanglp · Oct 28, 2017

It's really nice. I do want a M16A2 clone from bushmaster but my FFL told me it has been banned in Maryland. How about yours?

zhanglp · Oct 28, 2017

falconguy said:
Nice pieces! Here's my Bushmaster with a Vietnam era M16 bayonet.

It's really nice. I do want a M16A2 clone from bushmaster but my FFL told me it has been banned in Maryland. How about yours?

fred333 · Oct 28, 2017

zhanglp said:
It's really nice. I do want a M16A2 clone from bushmaster but my FFL told me it has been banned in Maryland. How about yours?

Bushmaster's banned by name. Although it's not always 100% accurate, you can search the Maryland State Police Firearm Search list to see whether a given firearm's been deemed (by our betters) as too dangerous for law-abiding Marylanders to keep, bear, transport or use in a safe, legal manner.

The Official AR-15 Picture Thread

The #1 community for Gun Owners of the Northeast

Member Benefits:

Active Member

Attachments

Active Member

Attachments

Member

Active Member

Ultimate Member

Attachments

Ultimate Member

Attachments

Ultimate Member

Ultimate Member

Ultimate Member

King Lurker

For great Justice

Judge not this race .....

Attachments

Active Member

Banned

Judge not this race .....

Judge not this race .....

Active Member

Attachments

Member

Member

Banned

Users who are viewing this thread

Log in

Forum statistics