- Aug 17, 2011
- 26,177
Damned piston puffers.... 
18" SPR Build, input requested.
- Thread starter BradMacc82
- Start date
The #1 community for Gun Owners of the Northeast
Member Benefits:
No ad networks! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
- Jul 29, 2014
- 49,992
I can't ignore it. I thought we were friends.
Already deleted one piston upper. I'm working on a permanent cure.
Indiana Jones
Wolverine
mk12 mod1. i believe you've seen my pictures. if not, text me and i'll send a few your way.
This!
Mine was built by High Caliber Sales and they stock any parts you might want to pick and choose from, if you like any that is.
Ive since upgraded to a Vortex Viper PST
Sent from my iPad using Tapatalk
- Jul 29, 2014
- 49,992
I can't ignore it. I thought we were friends.
Friend huh? Friends don't let friends shoot pistons.
clandestine
AR-15 Savant
- Aug 17, 2011
- 26,177
You had the addiction before.
Once he really accepts Chad into his life, the addiction will cease.
I don't remember if that's before or after the beatings begin, but the addiction will cease nonetheless.
- Jul 29, 2014
- 49,992
Anyone got a link to the local Pistons Anonymous?
btw, congrats on the gig. what is it? hitman for hilldawg?
- Aug 17, 2011
- 26,177
Cool. I got promoted from conductor to engineer, FEMA camp train number 87. See ya there!
browning guy
SCRUFFY NERF HERDER
Damned piston puffers....
Sounds like someone needs to form a support group, you know
maybe some one who has been through the pain...
shocker998md
Ultimate Member
Another MI gen 2 fan over here as well even though I don't have one on my spr they are on my carbines. On my SPR I just bought a YHM free floating tube. I don't have anything attached to it but a bipod so I just drilled and tapped a sling point to mount the bipod. Ill take pictures of it tonight and put them up along with all the specs.
Honestly not to rain on anyone's parade, but so far I'm not super duper impressed with it. I feel with a quality 14.5 or 16 I can do everything I could with my SPR but with just a little more hold over.
Granted I haven't had mine past 300 yards yet since I'm still working rounds up for it, so maybe it will shine out at 500 and 600 yards compared to an M4 sized rifle.
shocker998md
Ultimate Member
Heres a quick run down of mine until I get a better picture. Like I said so far, I feel I can do just as good with a 14.5 or 16" build.
Noveske 18" spr barrel
Young mfg Match bolt
Yhm tube
PSA upper ,lower, both build kits and buffer tube assembly
SSE trigger
Vlotor stock
Houge grip
Larue spr mount
Now sporting a luepold mark ar 6-18x40
Noveske 18" spr barrel
Young mfg Match bolt
Yhm tube
PSA upper ,lower, both build kits and buffer tube assembly
SSE trigger
Vlotor stock
Houge grip
Larue spr mount
Now sporting a luepold mark ar 6-18x40
- Jul 29, 2014
- 49,992
Heres a quick run down of mine until I get a better picture. Like I said so far, I feel I can do just as good with a 14.5 or 16" build.
Noveske 18" spr barrel
Young mfg Match bolt
Yhm tube
PSA upper ,lower, both build kits and buffer tube assembly
SSE trigger
Vlotor stock
Houge grip
Larue spr mount
Now sporting a luepold mark ar 6-18x40
Very nice. What's the gas length? Mid or rifle?
shocker998md
Ultimate Member
Intermediate, noveskees own thing. In between mid and rifle.
- Aug 17, 2011
- 26,177
Project is going on hold for a little bit, have more pressing issues to get a handle on first.
daNattyFatty
Ultimate Member
Story of my life! Good luck!
- Aug 17, 2011
- 26,177
Popped over to VA and picked up a black nitride BCG from a local manufacturer, spent an hour going over it with a fine tooth comb - spec'd out beautifully, better than I could hope for.
Still got to get the handle, gas components and hand-guard/rail, so the project is moving forward - just not as quickly as I'd like it to.
Still got to get the handle, gas components and hand-guard/rail, so the project is moving forward - just not as quickly as I'd like it to.
Last edited:
I know which BCG that is. They're nice.
Users who are viewing this thread
Forum statistics
Latest threads
-
-
-
Hair-trigger posting... please include more than just the "headline" (2 Viewers)- Started by Mr H
- Replies: 11
-
-
-
(Duplicate - mods please close) MoCo trans student arrested for threatening school- Started by Lafayette
- Replies: 2
-
